User guide

3 Working with the FB editor
3.4 Creating/reconfiguring the interconnection
54
Lenze · 9400 function library · Reference manual · DMS 6.7 EN · 08/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6. Press Insert button.
•The Define Function Block Properties dialog box appears.
7. If required, change the name preselected for the function block into a more significant na-
me.
• The instance name must not already be allocated within the interconnection.
8. If required, adapt the index for a parameterisable function block from which on the assign-
ment of user codes for the parameters is to start.
• If the user codes for the compatibility with earlier devices are not yet assigned, these are
suggested for the function block:
• If the user codes for the compatibility with earlier devices are already assigned, e.g. since
an instance of the function block is already available in the interconnection, a free (user-
defined) index will be automatically suggested which can also be changed, if required:
9. Press OK.
• The function block selected is inserted in the interconnection.
 Note!
The parameters described in this documentation are always listed together with the
user code index that results from the selection of the option Compatible with earlier
devices!