User guide

Lenze · 9400 function library · Reference manual · DMS 6.7 EN · 08/2014 · TD05 183

5 Function blocks

5.10 L_CamStretchFeed - stretching/compressing the position (relative)

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

5.10.1 Typical application

By means of this FB a feed motion with regard to the feed length at the L_CamProfiler FB can be sim-

ply altered via factors. Like this, the motion profile can be maintained.

[5-21] Example: Material feed with subsequent cut

 Feed motion

 Cutter

