Lenovo ThinkSystem DB730S FC SAN Switch Product Guide The Lenovo ThinkSystem DB730S Fibre Channel Switch is a Gen 7 high-density building block that enables dense rack-mount environments to connect more devices and build larger fabrics. Its 128 line-rate 64G FC ports in a 2U design allow organizations to create high-scale fabrics in less space. The DB730S utilizes 96x 64G SFP+ ports and 16x 2x64G double-density optical transceiver (SFP-DD) ports.
Key features To simplify and automate management, the DB730S Switch harnesses powerful analytics and advanced automation. Leveraging these capabilities enables organizations to realize a self-learning, self-optimizing, and self-healing SAN that maximizes performance and availability. The DB730S with Gen 7 technology transforms billions of telemetry data points in real time into automated actions that ensure the reliability and performance of critical applications, virtual infrastructure, and NVMe storage.
Accelerates troubleshooting with built-in advanced diagnostics tools featuring ClearLink Diagnostics with D_Ports (Diagnostic Ports) and select adapters from QLogic and Emulex, which helps ensure optical and signal integrity for 32G and 64G Fibre Channel optics and cables. Brocade Fabric Vision To further simplify operations and increase visibility, the DB730S includes Brocade Fabric Vision® technology to monitor and analyze the SAN.
Perfect for high-performance, latency-sensitive workloads Enterprises are quickly moving their high-performance, latency-sensitive workloads to NVMe flash-based storage. The DB730S Switch supports NVMe over Fibre Channel, enabling organizations to integrate Gen 7 Fibre Channel networks with next-generation flash storage, without a disruptive rip-and-replace. This enables enterprises to achieve faster application response times and harness the performance innovation inherent in NVMe storage.
The non-port-side panel of the DB730S includes the following components: Two redundant hot-swap power supplies, each with a C14 power connector Three N+1 redundant hot-swap system fan assembly units, each with two fans System specifications The following table lists the ThinkSystem DB630S system specifications. Table 1.
Component Media types Specification 64G: Brocade Secure hot-pluggable SFP-DD, SN connector; 64 Gb/s SWL. 64G: Brocade Secure hot-pluggable SFP+, LC connector; 64 Gb/s SWL, LWL 10 km. 32G: Brocade Secure hot-pluggable SFP+, LC connector; 32 Gb/s SWL, LWL 10 km, ELWL 25 km. 10G: Brocade Secure hot-pluggable SFP+, LC connector; 10 Gb/s SWL, LWL 10 km. Fibre Channel distance is subject to fiber-optic cable and port speed.
Models The following table lists the ThinkSystem DB730S FC SAN Switch models. Table 2. Models Part number Machine Type/Model Feature Description Port side exhaust airflow 7D9JA000WW 7D9JCTO1WW BQQ9 Lenovo ThinkSystem DB730S, 48 ports active with 64G SWL SFPs, 2 power supplies (port side exhaust), rail kit, Software: Fabric Vision, Trunking, Integrated Routing, Extended Fabric (model requires FOS 9.1.
Transceivers and cables With the flexibility of the DB730S FC SAN Switch, customers can choose the following connectivity technologies: SFP-DD ports For 64G FC links, customers can use 64G FC SFP-DD SWL optical transceivers for distances up to 100 meters on OM4 or up to 70 meters on OM3 50 µ MMF cables. These transceivers can operate at 64G, 32G, or 16G speeds.
Feature Part number code Description Maximum quantity 4M27A65424 BF6D Brocade Secure 32G ELWL SFP+ Transceiver (25 km) 96-112 10G FC SFP+ transceivers 4M27A65420 BF6E Brocade Secure 10G FC SWL SFP+ Transceiver 96-112 4M27A65421 BF6F Brocade Secure 10G FC LWL SFP+ Transceiver 96-112 OM3 optical cables for 32G and 64G FC SW SFP+ transceivers 00MN499 ASR5 Lenovo 0.
Feature Part number code Maximum quantity Description 4X97A81896 BPAA 11U-8020m-MG5M Fiber Cable, SN to SN, OM4 1.6mm Round Duplex Jacket, Magenta, OFNR, 5M 32 4X97A81898 BPAB 11U-8020m-MG10M Fiber Cable, SN to SN, OM4 1.6mm Round Duplex Jacket, Magenta, OFNR, 10M 32 4X97A81899 BPAC 11U-8020m-MG15M Fiber Cable, SN to SN, OM4 1.6mm Round Duplex Jacket, Magenta, OFNR, 15M 32 4X97A81901 BPAD 11U-8020m-MG25M Fiber Cable, SN to SN, OM4 1.
Transceiver Standard Cable Connector 32G FC SWL SFP+ (4M27A65416, 4M27A65417) FC-PI-6 Up to 30 m with LC-LC MMF cables supplied by Lenovo (see Table 4). 850 nm 50 µ MMF cable: 32GFC: Up to 100 m (OM4) or up to 70 m (OM3). 16GFC: Up to 125 m (OM4) or up to 100 m (OM3). 8GFC: Up to 125 m (OM4) or up to 100 m (OM3). LC 32G FC LWL SFP+ (4M27A65418, 4M27A65419) FC-PI-6 1310 nm 9 µ SMF cable: 32GFC, 16GFC, 8GFC: Up to 10 km.
Management software Lenovo offers optional Brocade SANnav™ Management Portal and SANnav Global View software license subscriptions that provide comprehensive visibility into the SAN environment, allow administrators to quickly identify, isolate, and correct problems, and accelerate administrative tasks by simplifying and automating workflows.
Fibre Channel standards The DB730S supports the standards listed at the following web page: https://www.broadcom.com/support/fibre-channel-networking/san-standards/standards-compliance Power supplies and cables The DB730S ships with two redundant hot-swap 1100 W AC power supplies. Each power supply has an IEC 309-C14 connector. The switch does not include power cords. Supported power cables and line cords are listed in the following table. Table 7.
Rack installation The DB730S comes standard with the fixed rack mount kit that can be used for 4-post rack installations. If needed, the switch can be mounted in a 2-post rack cabinet by using the optional mid-mount rack kit that is listed in the following table. Table 8. Rack-mount options Part number Feature Description 01KN770 AVG7 Lenovo Mid-mount Rack Kit The optional mid-mount rack kit is shown in the following figure. Figure 4.
Operating environment The DB730S FC SAN Switch is supported in the following environment: Air temperature: Operating: 0°C to 40°C (32°F to 104°F) Non-operating: -25°C to +70°C (-13°F to 158°F) Maximum altitude: Operating: 3,000 m (9,842 ft) Non-operating: 12,000 m (39,370 ft) Humidity: Operating: 10% to 85% non-condensing Non-operating: 10% to 90% non-condensing Electrical power: AC Voltage range: 100 to 240 VAC nominal, 90 to 264 VAC range, maximum input current 12A @ 100V or 5A @ 240V AC Frequency: 50 Hz
Warranty Upgrade (Preconfigured Support) Services are available to meet the on-site response time targets that match the criticality of your systems.
If warranty terms include parts-only base warranty, Lenovo is responsible for delivering only replacement parts that are under base warranty (including FRUs) that will be sent to a requested location for self-service. Parts-only service does not include a service technician being dispatched onsite. Parts must be changed at customer’s own cost and labor and defective parts must be returned following the instructions supplied with the spare parts. Lenovo Service offerings are region-specific.
Design Services Professional Services consultants perform infrastructure design and implementation planning to support your strategy. The high-level architectures provided by the assessment service are turned into low level designs and wiring diagrams, which are reviewed and approved prior to implementation. The implementation plan will demonstrate an outcome-based proposal to provide business capabilities through infrastructure with a risk-mitigated project plan.
External backup units The following table lists the external backup options that are offered by Lenovo that can be used in Lenovo FC SAN solutions. Note: Information provided in this section is for ordering reference purposes only. End-to-end LTO Ultrium configuration support for a particular tape backup unit must be verified through the System Storage Interoperation Center (SSIC): http://www.ibm.com/systems/support/storage/ssic Table 9.
Rack cabinets The following table lists the supported rack cabinets. Table 10.
Feature code Description ANZ ASEAN Brazil EET MEA RUCIS WE HTK INDIA JAPAN LA NA PRC Part number 4PU7A81117 BNDV 1U 18 C19/C13 switched and monitored 48A 3P WYE PDU - ETL N N N N N N N N N N N Y N 4PU7A77467 BLC4 1U 18 C19/C13 Switched and Monitored 80A N N N N N N N N N Y N Y N 3P Delta PDU 4PU7A77469 BLC6 1U 12 C19/C13 switched and monitored 60A 3P Delta PDU N N N N N N N N N N N Y N 4PU7A77468 BLC5 1U 12 C19/C13 switched and monitored 32A 3P WYE PDU Y Y Y Y Y Y Y Y Y N Y Y Y 4PU7A81118 BNDW
Part number Feature code Description ANZ ASEAN Brazil EET MEA RUCIS WE HTK INDIA JAPAN LA NA PRC 40K9617 6505 4.3m, 32A/230V, Souriau UTG Female to AS/NZ 3112 (Aus/NZ) Line Cord Y Y Y Y Y Y Y Y Y Y Y Y Y 40K9618 6506 4.3m, 32A/250V, Souriau UTG Female to KSC 8305 (S. Korea) Line Cord Y Y Y Y Y Y Y Y Y Y Y Y Y For more information, see the Lenovo Press documents in the PDU category: https://lenovopress.
Related publications and links For more information, see the following resources: Datasheet of the DB730S: https://lenovopress.com/datasheet/DS0141 Analyst report "64 Gb Fibre Channel Performance with Lenovo ThinkSystem Emulex LPe36002 Gen 7 FC HBA" https://www.lenovo.
Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Trademarks Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web at https://www.lenovo.com/us/en/legal/copytrade/.