Specifications
Table Of Contents
- Contents
- About this manual
- Safety information
- Important service information
- General checkout
- Related service information
- Lenovo IdeaPad S400 Touch
- Specifications
- Status indicators
- Hotkeys
- FRU replacement notices
- Removing and replacing an FRU
- 1010 Battery pack
- 1020 Hard disk drive
- 1030 DIMM
- 1040 PCI Express Mini Card for wireless LAN/WAN
- 1050 Fan assembly and Heat Sink assembly
- 1060 Keyboard
- 1070 System board
- 1080 LCD unit
- 1090 Speakers, base cover, USB board, power assembly and power board
- 1100 LCD front bezel
- 1110 LCD panel, LCD cable
- 1120 Integrated camera
- Locations
- Parts list
- Notices
Lenovo IdeaPad S400 Touch
35
1020 Hard disk drive
For access, remove this FRU:
• “1010 Battery pack” on page 33
Figure 2. Removal steps of hard disk drive
Remove the frame fixing screws .
Take out the hard disk drive secured in a metal frame in the direction shown by
arrow .
Step Screw (quantity) Color Torque
M2 × 3 mm, flat-head, nylok-coated (2) Silver 1.85 kgfcm
Attention:
• Do not drop the hard disk drive or apply any physical shock to it.
The hard disk drive is sensitive to physical shock. Improper handling
can cause damages and permanent loss of data.
• Before removing the drive, suggest the customer to backup all the
information on it if possible.
• Never remove the drive while the system is operating or is in suspend
mode.
a
a
a
a
b
b