Hardware Maintenance Manual

38
Miix 2 10 Hardware Maintenance Manual
1060 Volume board
For access, remove these FRUs in order:
• “1010 LCD cover” on page 31
• “1020 Battery pack” on page 33
• “1030 3G card (on select models)” on page 35
• “1040 Docking transfer board” on page 36
• “1050 DC-IN cable” on page 37
Figure 6. Removal steps of volume board
Detach the speaker connector in the direction shown by arrow
1
. Remove the
screw
2
.
2
1
Step Screw (quantity) Color Torque
2
M2.0 × 3.0, at-head, nylok-coated, Volume board (1) Black 1.5~1.8 kgf*cm
Remove the volume board in the direction shown by arrow
3
.
3
When installing: Make sure the speaker connector is attached rmly.