Car Video System User Manual

Attaching the Cables

Cable Connections On Back of Monitor and Computer

1. Power Cord

2. Audio Cable

3. DVI Cable

4. Analog Cable

Turn off your computer before performing the procedure below.

1. Connect the power cable to the AC port on the back of the monitor.

2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other

end to the computer’s D-Sub port.

3. (Optional – Requires a video card with DVI port) - Connect one end of the 24-pin DVI cable

to the back of the monitor and connect the other end to the computer’s DVI port.

4. Plug audio cable between the computer multimedia (or sound) card’s audio output and

monitor’s audio input.

5. Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does not display an image, see

Troubleshooting.

1 23 4