User Guide Desktop PC 8097, 8143, 8144, 8146, 8422, 8423, 8427

2. Remove the front bezel by pushing the blue release button as shown.
3. Remove the knockout from drive bay 3 by using a flat-blade screwdriver to pry
it loose.
4. PATA drives must be jumpered as either a master or a slave device. SATA hard
disk drives do not require either a master or a slave device jumper. If you are
installing an SATA hard disk drive, continue to step 6 on page 20.
5. If there is a combination of optical and parallel ATA hard disk drives in bays 1,
2, and 3, set the hard disk drive as a master device and the optical drive as a
slave device.
Refer to the documentation that comes with your drive for master/slave
jumper information.
Chapter 1. Installing options 19