User Guide Personal Computer 8129, 8132, 8133, 8134, 8135, 8136
2. You might have to remove an adapter to gain access to the memory connector.
See “Installing adapters” on page 14.
3. Rotate the drive bay assembly upward to gain access to the system board.
*XXXXXXXXX*
*XXXXXXXXX*
4. Locate the memory connectors. See “Identifying parts on the system board” on
page 11.
5. Open the retaining clips.
6. Make sure that the notch 1 on the memory module aligns correctly with the
connector key2 on the system board. Push the memory module straight
down into the connector until the retaining clips close.
Chapter 1. Installing options 13