User guide
56
User Guide
In Windows 8 or Windows 8.1 operating system, you also need to disable Fast
Startup function to meet the off mode requirement of ErP compliance.
To disable the Fast Startup function, do the following:
1. Select Apps
→
Control Panel from the Search charm.
2. From the Control Panel, choose All Control Panel Items
→
Power Options.
3. Select Choose what the power buttons do from the pop-up dialog box.
4. Choose Change settings that are currently unavailable option, and uncheck
the Turn on fast startup option from the Shutdown Settings list.
Additional information as required by EU Regulation 617/2013 implementing
Directive 2009/125/EC with regard to ecodesign requirements for computers and
computer servers can be found here: www.lenovo.com/ecodeclaration.
Electronic emissions notices
The following information refers to Lenovo machine type:
• 90BF
• 90BG
• 90B6
• 90B7
• 90BH
• 90C1
Federal Communications Commission (FCC) Declaration of Conformity
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, used, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee the interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhich
the receiver is connected.
• Consultanauthorizeddealerorservicerepresentativeforhelp.