User Guide

• Remotely controlling and communicating with devices such as mobile phones

Depending on the model, your computer might support the Bluetooth feature. To transfer data through the

Bluetooth feature, do the following:

Notes:

• It is not recommended to use the wireless feature (the 802.11 standards) of your computer simultaneously

with a Bluetooth option. The data transmission speed can be delayed and the performance of the wireless

feature can be degraded.

• Depending on the model, when you change the wireless LAN device status from Enabled to Disabled in

the BIOS menu, the Bluetooth device will also be disabled.

1. Do one of the following:

• Press the Bluetooth-control key

and turn on the Bluetooth feature.

• Open the Start menu, and then click Settings ➙ Devices ➙ Bluetooth & other devices. Turn on the

Bluetooth switch to enable the Bluetooth feature.

2. Right-click the data that you want to send.

3. Select Send to ➙ Bluetooth device.

4. Select a Bluetooth device, and then follow the instructions on the screen.

For more information, see the Windows help information system and the help information system of the

Bluetooth device.

Using the NFC devices

If your computer supports the NFC feature, you will see an NFC mark or label around the trackpad area.

NFC is a high-frequency and short-range wireless communication technology. By using NFC, you can

establish the radio communications between your computer and another NFC-enabled device over a few

centimeters or inches.

This section provides instructions on how to pair your computer with an NFC device. For more information

about data transfer, see the documentation of the NFC device.

Attention: During the data transfer, do not put your computer or NFC-enabled smartphone to sleep mode;

otherwise, your data might get damaged.

Enabling the NFC feature

By default, the NFC feature is enabled. If the NFC feature of your computer is disabled, do the following to

enable the NFC feature:

1. Open the Start menu and then click Settings ➙ Network & Internet ➙ Airplane mode.

2. Turn off the Airplane mode.

3. Turn on the NFC function.

P72 User Guide