Instructions

19
Red Right channel positive (R+)
Black Right channel negative (R-)
6. Adjust the cartridge’s position to make sure it is precisely aligned on
the headshell so that the stylus will be tracking the grooves in parallel
perfectly.
To achieve this, place the included paper cartridge alignment
protractor over the turntable spindle, carefully lift the tone arm and
place the tip of the stylus on the points marked 130mm and 250mm
respectively. Fine tune the cartridge’s position on the headshell until
the cartridge is perfectly in parallel with the reference lines at both
points.
7. Tighten the screws completely once the perfect alignment is achieved.
NOTE: If you are unfamiliar or uncomfortable with completing this procedure,
we recommend consulting with a professional to perform the installation.
Technical Specifications:
Nominal Speeds
33 1/3 & 45RPM
Speed Variance
±1%
Wow and Flutter
≤0.15%
Signal to Noise
55dB
Down force Range
3.0-6.0g
Effective Tonearm Length
8.6” (218.5mm)
Overhang
0.73in
Power Consumption
5W (Max)
Outboard Power Supply
12V/500mA
AC-DC
Dimensions (W x H x D)
420 x 360 x 125mm
Weight
4.8kgs
Technical Specifications: AT-3600L (audio-technica)