Technical Specifications

JOB NAME ITEM TAG
JOB LOCATION PART NUMBER
CONTRACTOR DATE
ENGINEER APPROVAL DATE
SUBMITTAL SHEET
www.legendvalve.com
1-800-752-2082
B
C
A
T-4500
STAINLESS STEEL INSERT STIFFENER
304 Stainless steel construction
Interlocking tab design resists crushing
Extended length permits an even sealing surface for the fitting's gasket
Tapered and fluted ends minimize insertion resistence and movement
Designed for use in potable water installations
Designed for insertion into the inside diameter of CTS polyethylene
plastic tubing
The 1-1/4" stiffener will also fit into the inside diameter of 1" IPS
polyethylene plastic pipe
Recommended on all pack-joint and ring compression water service fitting
installations onto polyethylene tubing or pipe
Prevents the collapse of the tubing or pipe end.
MATERIAL SPECIFICATION
PART MATERIAL SPECIFICATIONS
Stiffener body Stainless steel AISI 304
DIMENSIONS – WEIGHTS
Size A B C
3/4" 0.65 2.42 0.82
1" 0.85 2.42 0.97
1-1/4" 1.03 2.35 1.26
1-1/2" 1.21 2.35 1.5
2" 1.58 2.35 1.98
T-4500