36” Straight Hutch Estante de escritorio 0,91m Étagère pour bureau droit 0,91m www.legarefurniture.
Assembly | Montaje | Assemblage B C A C A B
Assembly | Montaje | Assemblage
C C G E D D Anti-Tip Strap Installation We strongly recommend using the anti-tip hardware provided to avoid tipping. It is preferred that you locate a wall stud in your drywall. If you locate the stud, anchors are not needed. If there is no stud available, utilize the plastic wall anchors provided. Thread the plastic cable tie through the hole in a tab and through the bracket as shown in the illustration. Feed through the other end of the cable tie and pull until snug. Place the unit against the wall.
Care & Finishing Thank you for the purchase of your new Legaré product. There are a few things you should do to protect its finish and to make sure it serves you well for many years to come. Painted and clear-coated finishes require little more than a light coat of lemon oil or furniture polish to make assembly easier and preserve the finish. Doing this before assembling the parts will prevent chafing and will make the parts easier to slide together.
Contents | Contenido | Table des matières Legare, the Legare logo and the FTA logo are registered trademarks of Legare, L.P. Covered under US patents. Other patents pending. Copyright ©1999-2011 Legare L.P. All rights reserved. Product specifications subject to change without notice. | Legare, el logotipo Legare, Divertido para Armar y el logotipo FTA son todas marcas registradas de Legare L.P. Copyright © 2000-2011 Legare L.P. Todos los derechos reservados. Amparados bajo patentes estadounidenses.
