Instructions / Assembly

QUICK START GUIDE
www.laviewusa.com
Step 1. Connect your cameras
Connect the green BNC plug and red power plug
of the siamese cable into the camera
Connect the opposite green BNC plug and red
power plug into the camera power splitter as well
as video in connector on the DVR (Repeat 3x)
Connect the power splitter into camera power
supply
•
•
•
Step 2. Connect to your monitor/TV
Connect your DVR and TV/monitor with a HDMI or
VGA cable (Not included)
Note: Your monitor/TV must support the output resolution of the
DVR or you may get a black screen or a possible error message. You
cannot use a laptop as a display.
•
Step 3. Connect the mouse and power
Connect the mouse to the USB port
Connect the 12V DVR power adapter to the DVR
•
•
Step 4. Connect to your network (OPTIONAL)
Connect the LAN port on the DVR to the LAN port
on your router via an Ethernet cable for remote
viewing on your mobile phone, tablets, PC and Mac
Note: The DVR will still work as a standalone video recorder if you do
not have internet connection and skip this step.
•
The connection is now completed. Turn on the
power switch and follow the start-up wizard on
your screen to conrgure the DVR. (next page)
Step 5. Congure the start up wizard
•
We recommend testing all the cameras and cables prior to installation.
3
4
1
2
3
4
VIDEO IN
AUDIO
OUT
LAN
RS-485 12V
IN
USB HDMI VGA
Camera
BNC Cable
Mouse
HDTV
PC Monitor
Wireless Router
Not Included
Camera Power
Adapter
DVR Adapter
Power Splitter
1920x1080
2
1
OPTIONAL
OR
x 4
HDMI
VGA
USB
12V
LAN
1080p