User's Manual

Windows NT 4.0 Installation

Windows NT Driver Installation

1. Once the LavaPort-Quad is installed in your PC, turn on your

computer and start NT.

2. Place the LavaPort-Quad installation diskette into your floppy drive

and select Run from the Start Menu.When prompted type:

A:\NT4.0\Setup.

3. After the necessary files have been copied, select My Computer and

start Control Panel.A new icon will appear called“LavaPort”.This

applet should now be used to configure ALL Com Ports in your PC -

not just LavaPorts.

Note: Make sure that you are installing the correct LavaPort-Quad

drivers for the appropriate operating system.

DO NOT install drivers for other Windows versions

under Windows NT