SAFETY PRECAUTION • WARNING –To make sure power is off before attempting installation. • WARNING – Support Directly From Building Structure. • WARNING –To reduce the risk of fire, electric shock, or injury to persons, unplug or disconnect the appliance from the power supply before the fan installation, cleaning, or servicing. • WARNING –Suitable for use with solid-state speed controls. • WARNING –Do not connect this fan to regulator or dimmer switch.
PARTS & ACCESSORIES Canopy Downrod Housing Bulb Not provided Transmitter Kit 5 4 1hr 6 3 3hr Transmitter Holder Battery CR Transmitter 1 2 Wall Screw x 2 2032 3V 6hr CR2032/3V Assembly Kit Plastic Anchor x 4 Self Tapping Screw &Washer x 4 2 Blade
INSTALLATION INSTRUCTION Screw (1) Lock Pin (2) Hanger Ball (3) Canopy (4) Canopy Ring (5) Coupling cover (6) Downrod (7) Clevis pin (8) Bolt (10) Nut (9) Spring Washer (11) Flat Washer (12) Set Screws (13) Coupling (14) Bulb (15) Not provided Screw (17) Glass (16) 4
INSTALLATION INSTRUCTION STEP 2 1) Remove the Clevis Pin (8), Nut (9), Spring Washers (11), Flat Washers(12) & Bolt (10) on Coupling (14). 2) Loosen the Screw (1) from Hanger Ball (3), remove the Hanger Ball (3) and Lock Pin (2). 3) Route the wires and safety wire from the motor through the Downrod (7). 4) Install the Downrod (7) to Coupling (14) and secure with Bolt (10), Flat Washer (12), Spring Washer (11), Nut (9) & Clevis pin (8).
INSTALLATION INSTRUCTION FOR LIGHT N G FOR LIGHT L MOTOR U MOTOR V MOTOR W STEP 4 SWITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT BREAKER FUSE BOX. 1) Connect wires from controller to power supply with wire connectors. 2) Insert the controller into the space of the mounting bracket, and tidy up the wiring.
TRANSMITTER FUNCTION TRANSMITTER SETTING This DC motor is equipped with self-learning frequency function transmitter. Read all the steps BEFORE proceeding. Each step must be followed exactly in order to program the transmitter. To use factory pre-programmed setting – Skip the below programming steps. Insert battery into transmitter, turn on the power supply to fan and it is ready to use.
TRANSMITTER FUNCTION Reverse Forward Fan rotates anti-clockwise creating a downward airflow delivering a cooling effect. Fan rotates clockwise creating an upward airflow moving warm air off the ceiling areas. This function works best at lower fan speed. Suitable for hot weather condition or air-conditioned condition. Suitable for cold weather or air-conditioned condition.
MAINTENANCE Due to the fan’s natural movement, connections may get loose after a period of usage. To ensure a proper and safety usage, inspect the suspension system and tighten all connections every 6 months. Cleaning Cleaning your fan periodically will prolong its useful life. Basic cleaning procedures are as follows: 1. Please shut off the power before you clean the light fan and replace the bulbs. 2. The bulbs and nearby parts will be still hot after the power is shut off.
CAUTION THANK YOU FOR YOUR PURCHASE READ INSTRUCTIONS CAREFULLY FOR SAFE INSTALLATION AND FAN OPERATION. IF UNSURE CONSULT A QUALIFIED ELECTRICIAN Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all instructions before using the product LIGHT FAN THE BEST PARTNER OF AIR CONDITIONER & AIR PURIFIER A lot of people think the fan is only used in the summer, actually fan has a great purpose is to speed up the indoor air circulation.