Assembly Instructions

MADE IN MALAYSIA

Page 1 of 2

BENCH

Thank you for purchasing this quality product.Be sure to check all packaging material

carefully for small parts that may have come loose inside the carton during shipment.

COMPONENT LIST:

HARDWARE LIST:

Flat Washer

Allen Key

Lock Washer

JCBC Bolt

(Short)

JCBC Bolt

(Long)

1 pce

4pcs

8pcs

12pcs

PART NO

FIGURE

DESCRIPTION

QTY

Hardware Bag

Bench Left Leg

Bench center Leg

Bench Right Leg

1 pce

2 pcs

PART NO

FIGURE

DESCRIPTION

QTY

This product will take 15-20

minutes to assemble.

Reminders

1.Use only the hardware supplied.

2.Once the product is assemble,level and tighten all the bolts.

3.Do not over-tighten bolts.

4.This item may require periodic tightening

NOTE:

1.Two or two people are needed for assembly

2 please keep all hardware parts out of the reach of children.

Bench Seat

PAGE 1
BENCH Thank you for purchasing this quality product.Be sure to check all packaging material carefully for small parts that may have come loose inside the carton during shipment.
PAGE 2
BENCH ASSEMBLY : STEP 1 1.1- Turn the Bench Seat upside down on a soft protective surface such as carpet. 1.2- Attach 4 Bench legs to the Bench seat using the provided hardware as shown in Fig.1. Fig.1 Lock Washer Flat Washer JCBC Bolt (Long) Allen Key STEP 2 2.1- Attach 2 Center legs to the middle of Bench seat using the provided hardware as shown in Fig.2. Fig.2 Flat Washer JCBC Bolt (Short) Lock Washer Allen Key STEP 3 3.1- Turn bench to upright position. 3.