0'x10' Soft Top Steel Gazebo with Netting
WARNING: Fabric meets CPAI-84 specification for flame resistance. It is Not Fire Proof. The fabric will burn if left in continuous contact with any flame source. The application of any harsh chemicals to the fabric may render the flame-resistant properties ineffective. Always read and follow the instructions before use. When assembling and using this product, basic safety precautions must always be followed to reduce risk of personal injury and damage to the product or surroundings.
PARTS LIST Description Sketch QTY A1 Screen A2 Screen B1 Cross Beam B2 Cross Beam C U Shape Bracket w/steel plate 4 pcs D1 Roof Tube 4 pcs D2 Roof Tube 4 pcs E Roof Tube 4 pcs F Top Connector 1 pc G Top Hook 1 pc H Triangle Shelf J Small Roof Cover 1 pc K Big Roof Cover 1 pc L Mosquito Netting 4 pcs AA Bolt BB Bolt CC Bolt DD Bolt EE Anchor 8 pcs FF Wrench 2 pcs 4 pcs 4 pcs 4 pcs 4 pcs 4 pcs M6 x 15mm M6 x 30mm M6 x 40mm M6 x 48mm 4 pcs 4 pcs 16 pcs 1
Assembly Step 1 B1 B2 Fig.3 B2 B1 A2 B1 A1 B2 Fig.2 B2 B1 Fig.1 A2 A1 A1 A1 A2 A2 Fig.1 Fig.2 CC B2 CC B1 DD A2 A1 Fig.3 B1 B2 C A2 A1 Bolt Hole inside CC Fig.1: Using 3xBolt(DD) to connect top/middle/bottom for Screen (A1) & Screen (A2).Repeat the above step for each Screen (A1) & Screen (A2) . Fig.2: Using Bolt (CC) to connect Cross Beam (B1)& Screen (A2) or connect Cross Beam (B2) & Screen (A1).Using Bolt (CC) to connect(C) and Screen(A1) or (A2).
Assembly Step 2 F Fig.5 D1 E D1 Fig.6 D2 Fig.4 E D2 E D2 Fig. 4 F Fig. 5 Fig.6 D1 E G D1 D1 D1 D1 F D2 E Fig.4: Insert Hook (G) into the Top Connector (F). Fig.5: Connect Roof Tube (D1) & Top Connector (F) long tube, Connect Roof Tube (E) & Top Connector (F) short tube. Fig.6: Insert Roof Tube (D1)to Roof Tube (D2) till you see the push pin out from the tube. Repeat the above step for each Roof Tube ( D1)and Roof Tube (D2).
Assembly Step 3 Fig.8 E D2 D1 E D2 Fig.8 D2 Fig.7 Fig.7 D2 Fig.8 E BB C B2 AA Fig.7: Insert Roof Tube (D2) to U Shape Bracket (C). Using Bolt (BB) to connect Roof Tube (D2) and U Shap Bracket (C) . Repeat the above step for each Roof Tube ( D2). Fig.8: Using Bolt (AA) to connect Roof Tube (E) and Cross Beam (B2).
Assembly Step 4 Fig. 9 J K Fig. 9 Fig. 10 H L H Fig. 11 Fig. 12 D1 Fig. 9 &D 2 Fig. 10 B1 / B2 Velcro Fig. 11 H Fig. 12 EE J&K L Fig.9: Pull the corner of Small Roof Cover (J), and insert Roof Tube (D1) to this corner. Pull the corner of Big Roof Cover (K), and insert Roof Tube (D2) to this corner. Repeat the above step for each corner. Fig.10: Attach the Mosquito Netting (M) Velcro to Cross beam (B1/B2). Fig.11: Hanging Triangle Shelf (H) to Screen (A1& A2).
