Installation Guide

HOW TO HANG A WALL

MURAL

CREATE A STATEMENT FEAT U R E WAL L

Create a statement feature wall in your home with a wall mural.

TOOLS YOU WILL NEED:

• Wall Filler

• Stanley Knife

• Scissors

• Wallpaper Paste

• Plumb Line

• Scraper

• Tape Measure

• Sand Paper

• Brush

• Smoother

YOUR MURAL COMES IN JUST ONE ROLL, CAREFULLY

UNWRAP AND CUT OFF THE INSTRUCTIONS FROM THE

END OF THE ROLL.

PREPARE YOUR WALLS:

1. Fill and sand any imperfections on your wall.

2. Clean the wall with detergent or sugar soap.

PAGE 1
HOW TO HANG A WALL MURAL CREATE A STATEMENT FEATURE WALL Create a statement feature wall in your home with a wall mural. TOOLS YOU WILL NEED: • Wall Filler • Stanley Knife • Scissors • Wallpaper Paste • Plumb Line • Scraper • Tape Measure • Sand Paper • Brush • Smoother YOUR MURAL COMES IN JUST ONE ROLL, CAREFULLY UNWRAP AND CUT OFF THE INSTRUCTIONS FROM THE END OF THE ROLL. PREPARE YOUR WALLS: 1. Fill and sand any imperfections on your wall. 2.
PAGE 2
LINE UP AND PASTE: 1. Measure 48cm out from your starting point and use a plumb line to draw a vertical line. This gives you a straight edge to line the right hand edge of your first panel. 2. Mix paste according to manufacturers instructions then apply your paste the wall paste on the first section of your wall. TOP TIP Your mural comes in sections, we recommend cutting each piece as you go. This way you can't get the panels mixed up. 3.