TDS

______________________________________________________________________________
Dalton Enterprises, Inc., 131 Willow Street, Cheshire, CT 06410, USA
Phone [phone] • Fax [phone] • www.latexite.com
Revised 02/27/18
TECHNICAL DATA SHEET
Latex•ite
®
Quick Patch H
2
O
Manufacturer Product#: 1 gal. – 21916,
3.5 gal. – 51619
UPC#: 1 gal. – 0 90932 21916 8,
3.5 gal. – 0 90932 51916 9
Appearance:
Black aggregate mixture
Maximum VOC:
<0.1% by weight, < 10 g/L
Application Temperature:
N/A
Specific Gravity:
1.3-1.5
Coverage/Yield
1 gal pail – Approximately 1.4 sq. ft. at 1” depth
3.5 gal. pail – Approximately 3.9 sq. ft. at 1” depth
Weight Per Gallon:
10.8-11.6 lbs. per gallon
Color:
Black
Consistency:
Solid
Boiling Point:
900º F
Cure Time (50% relative humidity, 70º F):
Traffic ready in 1 hour, full cure time 24 hours
Freeze ability:
N/A
Container Size & Weight:
1 gallon, approx. 12.5 lbs; 3.5 gallon, approx. 37.5 lbs
Latex·ite
®
Quick Patch H
2
O™ is a water activated, fast setting asphalt patch that gives a permanent result. Quick Patch H
2
O™
utilizes the latest technologies to deliver a VOC friendly patch that cures quickly and leaves a solid black, texturized finish. Traffic
ready in 1 hour. Quick Patch H
2
O’s formulation allows it to be applied without sidewalls and is perfect for driveway and parking
lot minor depressions, berms, edges, aprons and of course, potholes. It even works on concrete. Product can be applied in most
weather temperatures including warm temperatures as well as cold, damp weather.
 Black, stone aggregate formula.
 For potholes, depressions, edges, aprons, joints and large cracks.
 Nano Binder technology for maximum adhesion to sidewalls.
 Just pour, wet, and tamp... traffic ready in 1 hour.
 Year-round formula.
 Low VOC Formula.
Latex•ite
®
Quick Patch H
2
O
TM
is easy to use, but surface preparation is important. Sweep or blow out the pothole, depression, or
other area to be repaired so that it is free of loose dirt and debris. If temperatures are below freezing make sure to remove ice.
For best results, allow area to dry before applying product.
FEATURES
SURFACE PREPARATION
PHYSICAL PROPERTIES & PERFORMANCE