Specification

Dalton Enterprises, Inc., 131 Willow Street, Cheshire, CT 06410
Phone [phone] • Fax [phone] • www.latexite.com
Revised 09/28/16
TECHNICAL DATA SHEET
Latex•ite® PLI-STIX® Gray
Manufacturer Product#: 35100
UPC#: 090932351004
PHYSICAL PROPERTIES & PERFORMANCE
Appearance:
Gray Solid
Maximum VOC:
0 g/L
Application Temperature:
32º F and rising.
Specific Gravity:
N/A
Viscosity:
N/A
Weight Per Gallon:
Approximately 10 lbs. per gallon
Color:
Gray
Consistency:
Solid
Boiling Point:
>225º F
Cure Time (50% relative humidity, 70º F):
20 minutes
Freeze ability:
N/A
Container Size & Weight:
Approximately 4 lbs
We are pleased to introduce the GRAY version of Pli·Stix
®
Permanent Concrete Crack Filler. This product, like it’s black
version Pli Stix that has been available since 1999, is the same, hot applied, patented, permanent joint and crack filler…but now
it’s GRAY! After many requests for gray to fill concrete or faded blacktop…here it is and you don’t need a 200 gallon melter to
apply it!
Pli·Stix
®
are furnished as a gray solid “rope” in ½” thickness. It is an elastomeric, self-leveling sealant, which liquefies quickly
and can be used in concrete and asphalt pavements. When properly applied, it combines tenacious adhesive power with
extraordinary resiliency to protect against the infiltration of moisture or incompressibles through repeated thermal cycles of
expansion and contraction.
Pli·Stix
®
exhibit superior low temperature ductility, weather resistance, low oxidation breakdown and is non-tracking. It is the
only sealant available which is designed to be inserted into the crack or joint cavity first and then melted with direct heat process.
The patented modifier system contained in Pli-Stix
®
allows the material to withstand direct heat without experiencing
degradation.
 Only permanent crack filler on the marketplace .
 Fills cracks up to 1/2"
 Hot applied "rope-like" filler bonds to sidewalls
 Meets/exceeds requirements of ASTM C920-11 Standard Specifications for Elastomeric Joint Sealant
 Paintable: With either: Latex paint, masonry waterproofing paint or 2 component high solids epoxy
 T1 Usage for pedestrian and vehicular traffic areas
 For Joints & Cracks 1/2″ – 1″ (12.7-254.mm) in diameter
 Hot applied, self-leveling, gray, “rope-like” filler bonds to sidewalls. (Stretch or splice for narrow cracks, double over
for larger cracks).
 Chlorine resistant – great for pool deck concrete joints
 Packaging is Type #1 PET plastic and IS recyclable
 If concrete is cold we recommend pre-warming
 Ready to use immediately, melt-away wrapper!
 No VOC’s
FEATURES