Installation & Assembly

INSTALLATION MANUAL

WARNING:

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A

PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS

INVOLVED.

* Check for electric, gas, & plumbing lines before drilling or consult a professional.

* Turn off your electricity at the circuit breaker or main fuse box before installation.

* Do not restore power to the line until fully installed.

* Do not exceed the recommended wattage.

* Always allow bulbs to cool for 10 minutes before changing.

This fixture has been rated for up to one (1) E26

Socket 60-Watt maximum light bulb (not included).

To avoid the risk of fire, DO NOT EXCEED THE

RECOMMENDED LAMP WATTAGE.

The lighting fixture is meant for indoor use.

Pls read the installation instructions carefully and

follow the steps:

1. Remove the mounting bracket from the canopy.

Attach mounting bracket to junction box with

screws (E).

2. Make electrical connections using wire nuts (F).

3. Attach the canopy to the mounting bracket and

screw it by canopy nuts (C).

4. Install the glass shade with socket.

5. Install the light bulb (not included)

WALL SCONCE

PAGE 1
WALL SCONCE INSTALLATION MANUAL WARNING: THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. * Check for electric, gas, & plumbing lines before drilling or consult a professional. * Turn off your electricity at the circuit breaker or main fuse box before installation. * Do not restore power to the line until fully installed. * Do not exceed the recommended wattage.