Assembly Instructions

Step #1
Check all the components listed in "packaged" are included. Carefully put the top (H) on a flat and
protected work surface being careful not to scratch the finish.
Step #2
Put the legs (I) in the top bottom (H) by using bolt (C), lock washer (B), flat washer (A) & allen
wrench (D) to tighten the legs. See Diagram 1.
Step #3
Put the shelf (J) on, then turn the bolt hole of L shape metal bracket to aim the hole on leg (I) to
tighten the shelf (J) by using bolt (E), lock washer (F), flat washer (G) and allen Wrench(D). See
diagram 2.
Step #4
Turn the assembled unit over.
A
B
C
D
I
J
D
I
PACKAGED
(A) 8 –5/16 Flat washer (B) 8 –5/16 Lock Washer
(C) 8 –5/16 Bolt (D) 1 –Allen Wrench
(E) 4–1/4 Bolt (F) 4–1/4 Lock Washer
(G) 4–1/4 Flat washers (H) 1–Top
(I) 4–Leg (J) 1–Shelf
Read all instructions before starting assembly.
(
*
)
Caution: DO NOT OVERTIGHTEN.
We hope this Console Table will be a useful and decorative addition to your home for years to come.
Assembly Instructions
In any correspondence regarding this product, please include the complete identification number located on the
underside of the product.