Datasheet

U.I. Lapp
GmbH
DATENBLATT / DATA SHEET
ETHERLINE
®
HEAT Cat. 6
A
FL09YBC11Y
4x2x0,22sn
DB2170581
gültig ab / valid from : 25.08.2015
Ersteller / originator : RAWE/PDC
freigegeben / approved : HAPF/PDC
Dokument / document : DB2170581
Seite/ page 3 von/ of 4
Wir behalten uns alle Rechte gemäß DIN ISO 16016 vor.
PD 0019/2.2_11.10DE
Application
ETHERLINE® HEAT CAT.6
A
FL09YBC11Y 4x2x0,22sn is a PUR sheathed CATEGORY 6
A
high speed data cable for industrial
usage acc. to ISO 6722. The screening ensures a high reliability during data transmission. This cable is designed for fixed
installation and limited moved applications in dry and damp areas. It is heat resistant up to 105 °C and also suitable for
outdoor applications. At room temperature the cable is widely resistant against acids and bases as well as certain oils. Per-
manently moved applications with forcible control or usage on cable drums and reels with more than 15 N/mm
2
tensile
stress on the conductor cross-section is not allowed for this cable.
Naming acc. to ISO/IEC 11801: S/FTP
Short mark naming acc. to DIN 76722: FL09YBC11Y 4x2x0,22sn
Tested acc. to LV 112-1, LV-212-2, LV 213-2 and certified acc. to ECE-R 118.
Design
sketch
conductor
tinned copper, 7-wire (AWG24/7), ca. 0.61 mm Ø
insulation
foam-skin-polyolefin, heat resistant, max. 1.4 mm outer Ø
stranding
2 cores stranded to pair
core identification
pair 1: white + blue; pair 2: white + orange;
pair 3: white + green; pair 4: white + brown
pair screening
plastic laminated aluminum foil
stranding
screened pairs stranded to bundle
screening
braid of copper wire, tinned wire, coverage ca. 85 %
wrapping
thin non-woven tape, longitudinally applied
(used for improved stripping characteristics )
outer sheath
PUR based compound, yellow similar to RAL 1003,
wall thickness ca. 0.8 mm, outer Ø max. 8.1 mm
weight
ca. 0.077 kg/m
Electrical properties at 20° C
resistance (loop)
max. 173 Ω/km
insulation resistance
min. 5 GΩ xkm
mutual capacitance
nom. 48 nF/km (at 800 Hz)
characteristic impedance
nom. 100 Ω acc. to IEC 61156-6
operating peak voltage
125 V (not for power purposes)
test voltage (rms 50 Hz, 1 minute)
core/core: 1000 V
core/screening: 500 V