Datasheet

DATA SHEET
0046900
ÖLFLEX
®
HEAT 180 H05SS-F EWKF
valid from :
14.12.2007
elaborated by:
TE-K: M. Herb / R. Krämer
Document: DB0046900EN page 1 of 1
Nr.: 0019/0894
Application
ÖLFLEX

HEAT 180 H05SS-F EWKF is a harmonised silicone cable for the European market with improved
mechanical properties, i.e. the jacket is more initial-, tear- and notch resistant than a cable with a standard silicon
compound jacket. The cables are recommended for use with high ambient temperatures or close to hot surface
areas under sufficient ventilation. These cables are used for fixed indoor installation, at lamp attachments, in
smelting works, steel works and
hot-rolling mills, in electric motor engineering, shipbuilding and aircraft construction, in sauna- and solarium pro-
duction, as well as many other areas. In the case of room temperature ÖLFLEX

HEAT 180 H05SS-F EWKF is
generally resistant against oils, alcoholics, acids, caustic solutions, salt solution and salt water, furthermore is the
cable resistant against UV-radiation. At installation keep in mind that the cables are not damaged by sharp edges
or by abrasion.
Design
Conductor fine wire strand of tinned copper acc. to IEC 60228 resp. VDE 0295, class 5
Core insulation Silicone based compound EI2 acc. to HD 22.1 resp. VDE 0282-1
Core identification acc. to VDE 0293-1, with or without gn/ye ground conductor
up to 5 cores coloured in acc. to HD 308 S2 resp. VDE 0293-308
Outer sheath Silicone compound EM9 acc. to HD 22.1 resp. VDE 0282-1, colour black
Electrical properties at 20 °C
Nominal voltage 300 / 500 V
Test voltage 2000 V AC
Mechanical and thermal properties
Temperature range -50 °C up to +180 °C max. conductor temperature
pay attention to sufficient ventilation, if ignoring
the max. conductor temperature is +100 °C.
Min. bending radius 15 x cable diameter for flex. applications
Flammability flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2
after combustion a SiO2-ash skeleton remains, which has still
good insulation properties but has no more any mechanical stability
Halogen-free acc. to IEC 60754-1 resp. VDE 0472 part 815
Corrosivity acc. to IEC 60754-2 resp. VDE 0482 part 267-2-3
Approvals acc. to HD 22.15 S1 resp. VDE 0282-15
Tests in acc. to IEC 60811-x-x resp. VDE 0473-396, VDE 0481-395
EC directive this cable confirms to ECD 2006/95/EC (low voltage directive).