Data Sheet

DATA SHEET
0046001
ÖLFLEX
®
HEAT 180 SiHF
valid from :
11.12.2007
elaborated by:
TE-K: M. Herb / R. Krämer
Document: DB0046001EN page 1 of 1
No: 0019/0894
Application
ÖLFLEX
®
HEAT 180 SiHF are silicone cables and recommended for use in the case of high ambient tempera-
tures under sufficient ventilation and small mechanical stress. In the case of room temperature,
ÖLFLEX
®
HEAT 180 SiHF is largely resistant against oil, alcohol, acids, caustic solutions, salt solution and salt
water.
Design
Conductor fine wire strand of tinned copper acc. to IEC 60228 resp. VDE 0295, class 5
Core insulation Silicone based compound EI2 in acc. to HD 22.1 resp. VDE 0282-1
Core Identification acc. to VDE 0293-1, with gn/ye or without gn/ye ground conductor
up to 5 cores coloured in acc. to HD 308 S2 resp. VDE 0293-308
more than 5 cores black with white numbers
acc. to DIN EN 50334 resp. VDE 0293 part 334
Outer sheath Silicone based compound EM9 in acc. to HD 22.1 resp. VDE 0282-1
Outer sheath colour blazing red (similar RAL 3000)
Electrical properties at 20 °C
Nominal voltage 300 / 500 V
Test voltage 2000 V AC
Mechanical and thermal properties
Temperature range -50 °C up to +180 °C max. conductor temperature
pay attention to sufficient ventilation, if ignoring
the max. conductor temperature is +100 °C.
Min. bending radius 4 x cable diameter for fixed installation
15 x cable diameter for flex. applications
Flammability flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2
after combustion a SiO2-ash skeleton remains, which has still
good insulation properties but has no more any mechanical stability.
Halogen-free acc. to IEC 60754-1 resp. VDE 0472 part 815
Corrosivity acc. to IEC 60754-2 resp. VDE 0482 part 267-2-3
Tests in acc. to IEC 60811-x-x resp. VDE 0473 part 811-x-x, VDE 0472
EC directive this cable confirms to ECD 2006/95/EC (low voltage directive).