Data Sheet

DATA SHEET
1600xxx
RUBBER INSULATED CABLE H07RN-F
valid from :
12.01.2007
elaborated by:
TE-K: H.Schillinger / M. Herb
Document: DB1600199EN page 1 of 1
Nr.: 0019/0894
Application
H07RN-F is a heavy duty rubber sheathed cable for use on heavy appliance such as tool and agricultural
machinery subject to high levels of stress in premises exposed to dry and damp conditions as well as in the
open air and wet industrial environments. Continuous, busy movements, usage of these cables in moving
cable carriers, respectively on motor drum guidance or under a strain of more than 15 N/mm² is not allowed.
Assembly of rubber insulated cables (only the single core cable H07RN-F) in acc. to VDE 0282 part 4 they
are recognized as short-circuit and earth-fault proof in acc. to VDE 0100 part 520.
Design in acc. to HD 22.4 S4 that is VDE 0282 part 4
Conductor copper, fine wire strand in accordance to IEC 60228 that is VDE 0295,
class 5
Core insulation rubber compound EI4 in acc. to HD 22.1 that is VDE 0282 part 1
Identification in acc. to VDE 0293-1, with up to 5 cores are coloured-coded in acc. to
HD 308 S2 that is VDE 0293-308; cables with more than 7 cores black cores
with white numbers with gn/ye ground conductor in acc. to DIN EN 50334
that is VDE 0293 part 334
Outer sheath rubber compound EM2 in acc. to HD 22.1 that is VDE 0282 part 1
Colour outer sheath black
Electrical properties at 20° C
Nominal voltage 450 / 750 V
Test voltage 2500 V AC
Mechanical and thermal properties
Temp. range for fixed installation and handling: -25 up to + 60° C max. conductor
temperature
Min. bending radius for flexible use: 6 x cable diameter
Flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482 part 332-1-2
Approvals H07RN-F in acc. to HD 22.4 S4 that is VDE 0282 part 4
Tests in acc. to VDE 0472 and IEC 60811-x.x that is VDE 0473
The cable is indicated with the HAR sign or a tracer thread.
EC directive this cable confirms to ECD 73/23/EEC (low voltage directive).