Data Sheet

ManualsBrandsLAPP ManualsCables & WiresÖLFLEX® 440 P Control lead 18 G 0.75 mm² Grey 100 m

U.I. Lapp

GmbH

DAT

A SHEET

ÖLFLEX

440 P

DB 0012800

valid from: 2013-05-10

Originator: KASC / PDC

approved: HAPF / PDC

Document: DB0012800EN Page 1 of 1

PD 0019/2.2_11.10EN

Application

ÖLFLEX

440 P cables are cold flexible oil-resistant control cables with a core insulation of TPE and an outer sheath of Poly-

urethane for flexible use and fixed installation under increased mechanical load conditions. They are designed for use in dry,

damp and wet conditions. Outdoor use: They may only be installed considering the temperature range.

Continuous busy movements, compulsory guidance respectively usage on cable drums or pulleys or under a strain of more

than 15 N / mm² are not allowed. At room temperature they are widely resistant to certain oils and resistant to acids. The

outer sheath of Polyurethane is resistant against high mechanical load, particularly to abrasion and scouring, cut resistant,

microbe-proof and hydrolysis resistant. All materials used for these cables are halogen-free.

Application range: Construction machinery, machine tools, transfer lines, production plants

Design

Design based on

EN 50525-2-21 resp. VDE 0285-525-2-21 / HD 22.10 S2 resp. VDE 0282-10

EN 50525-2-51 resp. VDE 0285-525-2-51 / HD21.13 S1+A1 resp. VDE 0281-13

Approvals up to and inclusive 2,5 mm²: VDE Reg.-No. 6582

Conductor fine wire strands of tinned copper acc. to IEC 60228 resp. VDE 0295, Class 5

Core insulation Thermoplastic elastomer (TPE)

Core identification black cores with white numbers with or without GN/YE ground conductor

acc. to DIN EN 50334 resp. VDE 0293-334

Outer sheath Polyurethane compound TMPU in acc. to EN 50363-10-2 resp. VDE 0207-363-10-2

colour: silver grey, similar 7001

Electrical properties

Nominal voltage U

/ U 300 / 500 V

Test voltage 3000 V AC

Mechanical and thermal properties

Min. bending radius occasional flexing: 12,5 x outer diameter

fixed installation: 4 x outer diameter

Temperature range occasional flexing: -40 °C up to +90 °C max. conductor temperature

fixed installation: -50 °C up to +90 °C max. conductor temperature

Oil resistance acc. to EN 50363-10-2 resp. VDE 0207-363-10-2

Halogen-free acc. to VDE 0472-815

UV resistance acc. to EN ISO 4892-2-2006, method A (change of colour allowed)

Flammability flame retardant acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2

MUD MUD resistant acc. to IEC 61892-4 Annex D

Tests acc. to IEC 60811, EN 50395, EN 50396

EC directive This cable is conform to ECD 2006/95/EC (Low Voltage Directive) and 2011 / 65 / EU

(RoHS, Restriction of the use of certain hazardous substances).