Data Sheet

ManualsBrandsLAPP ManualsCables & WiresÖLFLEX® CLASSIC BLACK 110 Control lead 4 G 2.50 mm² Black 50 m

U.I. Lapp

GmbH

DATA SHEET

ÖLFLEX

CLASSIC 110 BLACK 0,6/1kV

DB 1120232

valid from: 19.12.2012

Originator: ROKR / PDC

Approved: HAPF / PDC

Dokument: DB1120232EN Page 1 of 2

PD 0019/2.2_11.10EN

Application

ÖLFLEX



CLASSIC 110 BLACK 0,6/1 kV cables are power and control cables with a black outer sheath for occasional flexi-

ble use and fixed installation subject to normal mechanical load conditions. They are among others designed for use in dry,

damp and wet rooms. Outdoor use: They may only be installed considering the indicated temperature range. At room tem-

perature they are widely resistant to acids, caustic solutions and certain oils. They are suitable for free non-continously re-

curring movement without tensile load or compulsory guidance. In addtion they are qualified for direct burial.

Application range:

Plant engineering and construction, industrial machinery, heating air conditioning systems, power station, stage application.

The cables are suitable for torsion application in wind turbines (WTG). The torsional load is limited to applications, as they

typically occur in the loop of a wind turbine.

Design

Design based on VDE 0250-1 and VDE 0276-627 bzw. HD 627 S1

Conductor fine wire strands of bare copper, acc. to IEC 60228 resp. VDE 0295, Class 5

Core insulation LAPP special PVC compound P8/1, better than the PVC compound TI2

in acc. with EN 50363-3 resp. VDE 0207-363-3

Core identification acc. to VDE 0293-1, with or without GN/YE ground conductor

black cores with white numbers

acc. to DIN EN 50334 resp. VDE 0293-334

Outer sheath PVC compound TM2 acc. to EN 50363-4-1 resp. VDE 0207-363-4-1

colour: Black, similar RAL 9005

Electrical properties at 20 °C

Nominal voltage U

/U 600 / 1000 V

Test voltage 4000 V AC

Mechanical and thermal properties

Min. bending radius occasional flexing: 15 x cable diameter

fixed installation: 4 x cable diameter

Temperature range occasional flexing: -5 °C up to +70 °C max. conductor temp.

fixed installation: -40 °C up to +80 °C max. conductor temp.

Torsion movement in WTG TW-0 (5000 cycles at ≥ +5°C)

TW-1 (2000 cycles at ≥ -20°C)

± 150 °/m at 1 revolution per minute

Flammability flame retardant in acc. with IEC 60332-1-2 resp. VDE 0482-332-1-2

Ozone resistance acc. to EN 50396

Summary of content (2 pages)

PAGE 1
U.I. Lapp GmbH DATA SHEET ÖLFLEX® CLASSIC 110 BLACK 0,6/1kV DB 1120232 valid from: 19.12.2012 Application ÖLFLEX CLASSIC 110 BLACK 0,6/1 kV cables are power and control cables with a black outer sheath for occasional flexible use and fixed installation subject to normal mechanical load conditions. They are among others designed for use in dry, damp and wet rooms. Outdoor use: They may only be installed considering the indicated temperature range.
PAGE 2
U.I. Lapp GmbH DATA SHEET ÖLFLEX® CLASSIC 110 BLACK 0,6/1kV DB 1120232 valid from: 19.12.2012 Mechanical and thermal properties (cont.) UV resistance acc. to EN ISO 4892-2:2006, Method A, DIN EN 50289-4-17/VDE 0819-289-4-17, Method A Direct burial acc. to UL 1277 Tests acc. to IEC 60811 resp.