Data Sheet

U.I. Lapp
GmbH
DAT
A SHEET
ÖLFLEX
®
CLASSIC 110
DB 1119752
valid from: 2014-01-27
Originator: KASC / PDC
approved: HAPF / PDC
Document: DB1119752EN Page 1 of 2
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
Application
ÖLFLEX
®
CLASSIC 110 cables are VDE approved power and control cables for occasional flexible use and fixed installation
for normal mechanical stresses. They are among others designed for use in dry, damp and wet rooms. Outdoor use: They
may only be installed with UV protection and considering the temperature range. At room temperature they are widely re-
sistant to acids, alkali-resistant and resistant to certain oils. They are suitable for free and limited continuously recurring
movement without tensile load or compulsory guidance.
Application range:
As power and connecting cable for control systems in machine tools, plant engineering and construction, industrial machin-
ery, conveyor systems, production and assembly lines as well as in measuring and control technology and data processing
systems.
This cable is suitable for torsion application in wind turbines (WTG). The torsional load is limited to applications, as they
typically occur in the loop of a wind turbine.
Design
Design based on EN 50525-2-51/VDE 0285-525-2-51/HD 21.13 S1+A1/VDE 0281-13
Approval VDE REG.-Nr. 7030
limited to following dimension range:
0.5 mm² - 2.5 mm² 2 - 65 cores
4 mm² - 16 mm² 2 - 7 cores
25 mm² - 120 mm² 2 - 5 cores
Conductor fine wire strands of bare copper, acc. to IEC 60228 resp. VDE 0295, Class 5
Core insulation LAPP special PVC compound P8/1
TI2 acc. to EN 50363-3 resp. VDE 0207-363-3 with increased requirements
Core identification acc. to VDE 0293-1, with or without GN/YE ground conductor
black cores with white numbers acc. to DIN EN 50334 resp. VDE 0293-334
Outer sheath PVC compound TM2 acc. to EN 50363-4-1 resp. VDE 0207-363-4-1
with increased requirements acc. to LAPP specification
colour: Silver Grey, similar RAL 7001
Electrical properties
Nominal voltage 300 / 500 V
Test voltage 4000 V AC
Mechanical and thermal properties
Min. bending radius occasional flexing: 10 x cable Ø
fixed installation: 4 x cable Ø
Temperature range occasional flexing: -15 °C up to +70 °C max. conductor temp.
fixed installation: -40 °C up to +80 °C max. conductor temp.