Data Sheet

ManualsBrandsLAPP ManualsCables & WiresÖLFLEX® CLASSIC 100 Control lead 4 x 1.50 mm² Grey 50 m

U.I. Lapp

GmbH

DATA SHEET

ÖLFLEX

CLASSIC 100

DB 0010000

valid from: 11.02.2013

Originator: ROKR / PDC

Approved: HAPF / PDC

Dokument: DB0010000EN Page 1 of 1

PD 0019/2.2_11.10EN

Application

ÖLFLEX



CLASSIC 100 cables are connecting- and control cables for occasional flexible use and fixed installation for medi-

um mechanical use. They are for use in dry, damp and wet rooms. They may only be installed outdoors with UV-protection

and in observation of the temperature range. At room temperature they are generally resistant against acids, caustics solu-

tions and certain oils. ÖLFLEX



CLASSIC 100 cables are used as supply and flexible connecting cable in machine tool manu-

facture, plant engineering, in power stations, in heating and air conditioning installations, etc. They are suitable for free non-

continuously recurring movement without tensile load or compulsory guidance.

This cable is suitable for torsion application in wind turbines (WTG). The torsional load is limited to applications, as they

typically occur in the loop of a wind turbine.

Design

Design based on EN 50525-2-51 resp. VDE 0285-525-2-51 / HD 21.13 S1 resp. VDE 0281-13

Conductor bare copper, fine wire strand in acc. with IEC 60228 resp. VDE 0295, Class 5

Core insulation PVC compound TI2 acc. to VDE 0207-363-3 with increased requirements

acc. to Lapp specification

Core identification with up to 5 cores are coloured-coded in acc. to HD 186 resp. VDE 0293

or HD308S2 that is VDE 0293-308; cables with more than 5 cores are colour-coded in

acc. to LAPP-ÖLFLEX colour-code.

Outer sheath PVC compound TM2 acc. to VDE 0207-363-4-1 with increased requirements

acc. to LAPP specification

Electrical properties

Nominal voltage 0,5 mm

to 1,5 mm

: 300 / 500 V

from 2,5 mm

: 450 / 750 V

from 2,5 mm

, fixed and protected installation: 600 / 1000 V

Test voltage 4000 V AC

Mechanical and thermal properties

Min. bending radius occasional flexing: 15 x cable diameter

fixed installation: 4 x cable diameter

Temperature range occasional flexing: -5 °C up to +70 °C max. conductor temp.

fixed installation: -40 °C up to +80 °C max. conductor temp.

Torsion movement in WTG TW-0 (5000 cycles at ≥ +5°C)

TW-1 (2000 cycles at ≥ -20°C)

± 150 °/m at 1 revolution per minute

Flammability flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482-332-2-1

Tests acc. to IEC 60811 resp. VDE 0473-811, VDE 0472, EN 50395, EN 50396

EC-Directives This cable is conform to the EC-Directives 2006/95/EC (Low Voltage Directive) and

2011/65/EU (RoHS, Restriction of the use of certain hazardous substances).