Data Sheet

DATA SHEET
0028202
UNITRONIC
®
LiYY
valid from :
04.09.2006
elaborated by:
TE-K:
Document: DB0028202_2EN page 1 of 1
Nr.: 0019/0894
Application
UNITRONIC

LiYY is a flexible control cable for control and Data transmissions for weak-current applications.
The cable is intended for static laying and flexible use, but not for constantly moving using in the electronic
sector; among other places., it may be used in dry and damp rooms.
Design, dimenisions and electrical characteristics are acc. or similar to the following regulations:
Design
similar to VDE 0812
Conductor standed conductor of bare copper, similar to VDE 0812
≥ 0,5 mm
2
acc.to VDE 0295, class 5
Core insulation PVC compound YI2 in acc. with VDE 0207, part 4
Colour code DIN 47100, without colour repetition after the 44th core
(exception colour sequence for cables with 4 cores:
white, brown, green, yellow)
Outer sheath PVC compound YM2 in acc. with VDE 0207 part 5
Colour of sheath: pebblestone-gray (RAL 7032)
Technical Data
Conductor resistance 0,14 mm
2
148 Ω/km,
0,25 mm
2
79,9 Ω/km
0,34 mm
2
57,5 Ω/km
≥ 0,5 mm
2
nach VDE 0295
Insulation: spec. Insulation resistance min. 10 GΩxcm acc. to VDE 0207, part 4
Inductance approx. 0,67 mH/km
Operating voltage (not for power purposes)
(peak value) 0,14 mm² 350 V
≥ 0,25 mm² 500 V
Test voltage: 0,14 mm² 1200 V
≥ 0,25 mm² 1500 V
Minimum bending radius at flexible use: 10 x cable diameter
Temperature range flexing: - 5 °C up to +70 °C
static: - 40 °C up to +80 °C
Flame propagation flame retardant acc. to VDE 0482, part 265-2-1 / IEC 60 332-1
UNITRONIC

LiYY
At room temperature is UNITRONIC

LiYY largely resistant to the action of acids, caustic solutions and certain
oils