Data Sheet

ManualsBrandsLAPP ManualsCables & WiresLAPP 0012457 Connection cable ÖLFLEX® 540 P 2 x 1 mm² Yellow 50 m

U.I. Lapp

GmbH

DATA SHEET

ÖLFLEX

540 P

DB 0012452

valid from: 2014-03-18

Originator: KASC / PDC

approved: HAPF / PDC

Document: DB0012452EN

Page 1 of 2

PD 0019/2.2_11.10EN

Application

ÖLFLEX

540 P cables are oil-resistant connecting cables with an insulation of TPE and an outer sheath of Polyurethane for

flexible use and fixed installation under increased mechanical load conditions. They are among others designed for use in

dry, damp and wet conditions. Outdoor use: They may only be installed considering the indicated temperature range.

Continuous busy movements, compulsory guidance respectively usage on cable drums or pulleys or under a tensile strain of

more than 15 N/mm² conductor cross-section are not allowed. ÖLFLEX

540 P cables are increased oil-resistant and at

room temperature widely resistant to acids and caustic solutions. The outer sheath is resistant to high mechanical stress,

particularly to abrasion and scouring, is cut resistant, microbe-proof and hydrolysis resistant. All materials used for these

cables are halogen-free.

Application range:

construction machinery, building sites, camping sites, stage application, agricultural equipment, industrial machinery

Design

Design based on

EN 50525-2-21 resp. VDE 0285-525-2-21 / HD 22.10 S2 resp. VDE 0282-10

Approvals up to 1,0 mm²: VDE Reg.-No. 6583

starting at 1,5 mm²: VDE Reg.-No. 6584

Conductor fine wire strands of tinned copper acc. to IEC 60228 resp. VDE 0295, Class 5

Core insulation Thermoplastic elastomer (TPE)

Core identification up to 5 cores coloured acc. VDE 0293-308 resp. HD 308 S2

more than 5 cores: black cores with white numbers

with GN/YE ground conductor acc. to DIN EN 50334 resp. VDE 0293-334

Outer sheath Polyurethane compound TMPU acc. to EN 50363-10-2 resp. VDE 0207-363-10-2

colour: yellow, similar RAL 1016

Electrical properties

Nominal voltage up to 1,0 mm²: U

/ U 300 / 500 V

starting at 1,5 mm²: U

/ U 450 / 750 V

Test voltage up to 1,0 mm²: 3000 V AC

starting at 1,5 mm²: 3500 V AC

Mechanical and thermal properties

Min. bending radius occasional flexing: 10 x outer diameter

fixed installation: 4 x outer diameter

Temperature range occasional flexing: -40 °C up to +90 °C max. conductor temperature

fixed installation: -50 °C up to +90 °C max. conductor temperature

Flammability flame retardant acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2

Oil resistance acc. to EN 50363-10-2 resp. VDE 0207-363-10-2

Halogen-free acc. to. VDE 0472-815

Summary of content (2 pages)

PAGE 1
U.I. Lapp GmbH DATA SHEET DB 0012452 ÖLFLEX® 540 P valid from: 2014-03-18 Application ® ÖLFLEX 540 P cables are oil-resistant connecting cables with an insulation of TPE and an outer sheath of Polyurethane for flexible use and fixed installation under increased mechanical load conditions. They are among others designed for use in dry, damp and wet conditions. Outdoor use: They may only be installed considering the indicated temperature range.
PAGE 2
U.I. Lapp GmbH DATA SHEET DB 0012452 ÖLFLEX® 540 P valid from: 2014-03-18 UV-resictance acc. to EN ISO 4892-2-2006, method A (change of colour allowed) MUD MUD resistant acc. to IEC 61892-4 Annex D Tests acc. to IEC 60811, EN 50395, EN 50396 EC-Directives These cables are conform to the EC-Directives 2006/95/EC (Low Voltage Directive) and 2011/65/EU (RoHS, Restriction of the use of certain hazardous substances). Originator: KASC / PDC approved: HAPF / PDC All rights reserved acc.