User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
5
 General Base Station Features
 Number of ESSID : 8
 Three mode : BASE STATION P to P Mode, BRIDGE Mode and CPE Mode
 Slot Time, ACK/CTS Timeout support
 RSSI threshold support
 TX burst support
 Beacon interval : adjustable to best adapt to the deployment environment
 IBSP : to facilitate faster roaming for the stations among different BASE STATION nearby
 802.11g protection : to let the transmission rate of the associated 802.11g stations not to be affected with
surrounding existence of 802.11b stations
 RTS and fragmentation control
 Adjustable transmission power : 9 Levels (*Note)
 Wireless site survey : for scanning the surrounding base stations for connection
 VLAN tag support
 Gateway Features in the CPE Mode
 Built-in NAT mode : to support IP sharing on the LAN side for multiple users(subscribers) to get access to the
Internet
 Built-in DHCP server for issuing local IP addresses
 Built-in DNS client
 IP/ Port forwarding and DMZ
 IP/ MAC rule filtering
 Security
 Data encryption : WEP (64/128/152-bits), WPA/WPA2 with TKIP or AES-CCMP
 User Authentication : WEP, IEEE 802.1X, WPA-PSK, WPA-Enterprise, MAC ACL
 Setting for TKIP/ CCMP/AES key's refreshing period
 Support IEEE 802.11 mixed mode; open and shared key authentication
 Hidden ESSID : broadcast SSID option can be turned off to prevent SSID broadcast to the public
 Station Isolation setting : when enabled, all stations associated with this BASE STATION can not
communicate with each other
 Support data encryption over BRIDGE link
Note: The Power Level only can be adjusted lower than default 9 Level. Each Level is 3dBm lower from default
maximum output power. The default output Power for each channel is in the bellowed table.
Channel Channel 1 Channel 2~10 Channel 11
Fixed Maximum Output Power 18.34 dBm 26.85 dBm 16.77 dBm