User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
31
information.
 SNMP rw password : Enter the password that allows read/write access to the system's SNMP
information.
 SNMP Trap : Events on cold start, interface up & down, and association & disassociation can be reported via
this function to an assigned server.
 Community : Enter the community strings required by the remote host computer that will receive trap
messages or notices send by the system.
 IP : Enter the IP address of the remote host computer that will receive the trap messages.
Change these settings as described here and click Save button to save your changes. Click Reboot button to
activate your changes