User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
29
4.1.4 Time Server
System time can be configured via this page where manual setting and NTP server configuration are both
supported. Please click on System -> Time Server and follow the below setting.
 Local Time : Display the current time of the system.
 Setup Time Use NTP : Enable Network Time Protocol, NTP, to synchronize the system time with NTP server.
 Default NTP Server : Select the NTP Server from the drop-down list.
 Time Zone : Please set a time zone from where the accurate time can be supplied, (GMT+08:00) Taipei
for example.
 Daylight saving time : Enable Daylight saving time from where the accurate time needed.
 User Setup : Enable User Setup and Click Set Time button; the system time can be configured manually.
 Set Time : Click Set Time button, the Time field should be changed automatically.
 Set the time : Select the appropriate Year, Month, Day, Hour, Minute and Second from the drop-down
list.
Change these settings as described here and click Save button to save your changes. Click Reboot button to
activate your changes