Assembly Instruction

ASSEMBLY INSTRUCTION

Table Top

1pc

Table Leg

4pcs

Jcbc Bolt

M8 x 80mm

Spring Washer

8 pcs

8 pcs 1 pc

This page lists all the contents included in the

box. Please take the time to identify the

hardware as well as the individual components

to this product. As you unpack and prepare for

assembly, place the contents on a carpeted or

padded area to protect them from damage.

Flat Washer

M8 x 22mm

Allen Key

M8 x 60

36" COUNTER HEIGHT TABLE

PAGE 1
ASSEMBLY INSTRUCTION 36" COUNTER HEIGHT TABLE Table Top Table Leg 1pc 4pcs Flat Washer M8 x 22mm Allen Key M8 x 60 8 pcs 1 pc Jcbc Bolt M8 x 80mm Spring Washer M8 8 pcs 8 pcs This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
Put the Table Top (A) upside down on the soft and smooth surface. Attach Table Leg (B) onto Table Top (A).Then insert Jcbc Bolt (C), Spring Washer (D) and Flat Washer (E) into holes of each corner block of Table Top (A), by using Allen Key (F). ***Do not fully tighten the nut or bolts until all nuts and bolts are attached. Stand table up on an even surface and check that it is balanced. If there is a slight wobble, apply downward pressure in the corner where a leg is uneven.