TDS

TECHNICAL DATA SHEET
Acrylic Caulk (CC-756)
20 – year Acrylic Latex Sealant
Description
A good quality latex caulk suitable for all
interior and exterior applications where
minimum joint movement is expected;
adheres to most building materials and is
easy to apply, tool and clean up
.
Product Advantages
• 100% paintable
• Moisture resistant
• Water cleanup
• Interior / exterior
• Twenty-year warranty
• All-purpose
• Mildew resistant
• Long-lasting
Product Uses
Ideal to seal cracks around doors and
window frames, baseboard trim and other
areas where joint movement is minimal;
excellent for sealing cracks in concrete,
drywall and wood.
Technical Data
Solids: 72.00 ± 1% by weight
58.00 ± 1% by volume
Weight / Gallon: 2.73 ± 1 lb.
Finish: White
Flash Point: Non-Flammable
Fire Rating: Class A
Viscosity:
350,000 – 400,000 cps
Drying Time:
Tack free: 15 minutes
To coat with latex paint: 2 hours
To coat with alkyd paint:24 hours
Theoretical Coverage:
Approximately 34 linear feet of 1/4” bead
per 10.1- oz. cartridge.
Application
(1) Apply at temperatures above 40ºF
(5˚C) and when no precipitation is
expected within 72 hours.
(2) Cut nozzle to desired bead size (1/4”
is recommended).
(3) Hold gun at 45˚ angle to the seam
and push LANCO
®
Acrylic Caulk CC-
756 ahead of nozzle, applying
uniform pressure to the trigger in
order to get a smooth bead.
(4) Tool within 15 minutes with finger or
damp smooth sponge.
(5) Limit joint size to be filled to
approximately 1/4” (0.6 cm) deep by
1/4” (0.6 cm) wide. If depth of joint
exceeds 3/8”, use polyethylene foam
or oakum as backup filler.
(6) Wipe away excess with a damp cloth
before surface skins.
CLEANUP: Clean all equipment
immediately after use with warm soapy
water. Completely flush all spray equipment
with this solution.