User's Manual

Operation 25
Starting and stopping the voice control function


 First read and observe the safety warnings on page 3 and the introductory information
on page 23.
Starting the voice control function
• Press the , button on the multifunction steering wheel or the χ button on the three-button module.
• Wait for the tone.
• Say the voice command.
• Follow the further instructions given in the voice dialogue (long dialogue).
Closing the voice control function
• Press the , button on the multifunction steering wheel or the χ button on the three-button module.
You can cancel at any time by saying the cancel command.
Press the , or χ button on the multifunction steering wheel during a voice announcement. The
voice announcement is immediately stopped and an acoustic warning is given. You can then say a
voice command immediately.
WLAN


 Introduction
To start Internet browsing, enter the Telephone menu, select WLAN, select Switch on and press OK.
The WLAN network name will be displayed in the instrument cluster display. When WLAN is switched
on the first time, the system will offer you immediately the oprion to view the password.
WLAN Name and Password
In the WLAN menu select WLAN Name to view or change the network name. To change the name,
select Rename. Then enter the desired name with the steering wheel keys.
To view the WLAN password, enter the Telephone menu, select WLAN and then WLAN Password.
You can either view the active password or generate a new one.
Security
WPS Configuration
You have the choice between two WPS methods:
• WPS PIN, requires the entry of the PIN from your mobile device with the steering wheel
keys.
• Push button, allows you to handle the WLAN configuration on your mobile device.
Enter the Telephone menu, select WLAN and then WPS Configuration to select your preferred meth-
od.
Encryption
The PREMIUM mobile phone provision supports encryption of WLAN traffic, using WPA2. In China,
the chinese WAPI standard is supported, as well.