User's Manual
Table Of Contents
- Contents
- Introduction
- Features
- System Overview
- System LEDs
- Cables
- Connect your LaCie 2big Dock Thunderbolt 3
- Operation
- Docking Features
- Expansion Port
- Daisy Chain and Power Delivery
- Manage RAID
- Hard Drive Maintenance
- Formatting and Partitioning
- Frequently Asked Questions
- All users
- Problem: My file transfers are too slow.
- Problem: I connected LaCie 2big Dock to my computer but it does not power on and I cannot see the device in LaCie RAID Manager.
- Problem: I want to change the RAID level.
- Problem: I disconnected my computer from the LaCie 2big Dock during RAID synchronization or initialization.
- Problem: I have a USB-C hard drive that I want to add to the Thunderbolt 3 daisy chain.
- Problem: I must password protect and/or encrypt my hard drive.
- Problem: I'm receiving file transfer error messages.
- Problem: DisplayPort to HDMI display does not work.
- Mac
- Windows
- All users
- Regulatory Compliance
2. Connect the VGA, DVI or HDMI adapter to your configured audio/video display.
Disconnecng the DisplayPort
1. Grasp the DP 1.2 end of the cable or adapter that’s connected to your LaCie 2big Dock.
2. Hold down the release tab with your thumb, and then pull back to remove the cable from the port.
31LaCie 2big Dock Thunderbo lt 3
1/10/20