Owner Manual

ManualsBrandsLACAVA ManualsBathAquaplane White Rectangular Wall Mount Bathroom Sink with Overflow

LACAVA®

L’Amore per l’Eleganza

6630 west wrightwood ave chicago il 60707 usa tel 773 637 9600 fax 773 637 9601 info@lacava.com www.lacava.com

Owner’s Manual

Sinks Installation

Important: Keep this manual for future technical assistance and/or replacement parts. Please read the instructions within

the booklet carefully prior to installation. LACAVA recommends that this fixture be installed by a professional plumber and

will not be held responsible for any damage caused by improper installation. It is the responsibility of the homeowner to

ensure that this fixture complies with all local plumbing codes. Please see the Terms & Conditions found within this

booklet for additional information. For technical assistance please contact 773.637.9600.

Importante: Guarde este manual para futura asistencia técnica y / o piezas de repuesto. Por favor, lea las instrucciones

en el folleto cuidadosamente antes de la instalación. LACAVA recomienda que este aparato sea instalado por un técnico

y no se hace responsable de los daños causados por una instalación incorrecta. Es la responsabilidad del propietario

garantizar que este aparato cumpla con todos los códigos de plomería locales. Por favor, consulte nuestros Términos y

Condiciones que se encuentran en este folleto para información adicional. Para obtener asistencia técnica, por favor

contacte a: 773.637.9600.

Table of Contents/Contenido:

Page 2: Installation for Wall-mount Sinks

Page 3: Installation for Vanity-Top Sinks

Page 4: Installation of Undermount Sinks

Page 5: Installation of Self-rimming Sinks

Page 6: Installation for Vessel Sinks

Page 7: Cleaning and Care

Page 8: Warranty

Page 9: Terms and Conditions

Caution!

Porcelain is a fragile material , please unpack your sink and

and handle it with care. Use protective blankets or sheets for

floors and other surfaces that the item will be resting on before it

is installed as the bottom can cause scratches.

Damage caused during installation is not covered by warranty.

Please see our terms and conditions for additional details.

Summary of content (10 pages)

PAGE 1
LACAVA ® L’Amore per l’Eleganza Owner’s Manual Sinks Installation Caution! Porcelain is a fragile material , please unpack your sink and and handle it with care. Use protective blankets or sheets for floors and other surfaces that the item will be resting on before it is installed as the bottom can cause scratches. Damage caused during installation is not covered by warranty. Please see our terms and conditions for additional details.
PAGE 2
Installation Instructions for Wall-mount Sinks 1. In order to provide proper support for wall-mounting a sink, it's usually necessary to remove a small section of drywall so that the wall studs can be accessed to attach blocking between them. 2. Based on the sink’s dimensions and mounting height (usually 30”-35” above floor), decide where support will be needed. 3. Remove the drywall in that area and install 2-by-6 or 2-by-8 blocking between the wall studs.
PAGE 3
Installation for Vanity-Top Sinks 1. Based on the sink’s dimensions and mounting height (usually 30”-35” above floor), decide what support will be needed to support the vanity and sink. 2. Install proper support for the selected vanity, blocking or plywood backing. Once the proper support is in place, finish the wall. 3. Attach the vanity to the wall, bolt it to wall studs or installed wall support. 4. Make sure the vanity is level and securely installed. 5.
PAGE 4
Installation Instructions for Undermount Sinks 1. Prepare the countertop cutout according to the sink’s size. IMPORTANT! The cutout size should be at least 1/4” smaller on all sides than the inside dimensions of the sink. 2. Apply a small bead of silicone around the top edge of the washbasin, making sure to follow the directions on the label. 3. Place the countertop upside down and then position the washbasin over the cutout in the top. 4.
PAGE 5
Installation Instructions for Vessel Sinks 1. Refer to the sink specs for proper cutout size. For most above-counter and vessel sinks a standard cutout of 4”-6” will work. The cutout has to be just large enough so that the drain assembly can be tightened directly onto the porcelain. IMPORTANT! The drain assembly does not attach the sink to the countertop. 2.
PAGE 6
Warranty LACAVA warrants its products to be free from any defects in materials or workmanship, during normal residential or commercial use including all hinges, drawer slides, cartridges, finishes, and general workmanship of the item. LACAVA warranties do not cover normal wear and tear, damages due to negligence, improper installation, alterations, improper repairs, improper use, improper maintenance, or damages due to uses of the product other than its intended and normal use.
PAGE 7
Terms and Conditions UNIQUENESS: Many LACAVA products are made of natural stone, woods, or metals. Because of the natural variations, and/or handmade nature of the products, slight differences are expected and are not deemed manufacturing defects. SHIPPING POLICIES: Once the merchandise is released to and accepted by the carrier, LACAVA's responsibility ends. LACAVA LLC is not responsible for damages occurring in transit.
PAGE 8
Términos y Condiciones SINGULARIDAD: Muchos productos están hechos de piedra natural, maderas o metales. Debido a las variaciones naturales, y / o la naturaleza de los productos artesanales, pequeñas diferencias se pueden esperar y no se consideran defectos de fabricación. POLÍTICAS DE ENVÍO: Una vez que la mercancía es entregada y aceptada por la compañía de transporte, la responsabilidad de LACAVA termina. LACAVA LLC no es responsable por daños ocurridos en tránsito.
PAGE 9
Installation Instructions for Self-rimming Sinks 1. Use a template to draw the cutout line on the countertop. If there is no template provided, then prepare your own template by placing the bowl upside down on a rigid sheet of paper and tracing around the outside edge. Then draw a second line ¾” inside that line, and use this as your cut line. Then make the cutout on the paper template and test the fit on the sink. 2.
PAGE 10
Cleaning and Care For best results, please care for this product in accordance with the following instructions: - Only use warm water and a mild detergent (i.e. dishwashing soap) for cleaning. - If another cleaner is used, check the label to make sure that it is safe for use on the material being cleaned and always test in an inconspicuous area first. - Make sure to wipe any excess cleaners off with a damp sponge or cloth and then rinse with water.