Install Instructions

Mascot FT, Wall Mounted, Combination Boiler
Page 73
8.3 Draining and Cleaning
1. Place a bucket under the appliance to collect the residual water inside the combination boiler.
2. Press the Power button on the front control panel to turn OFF the electrical power to the combination boiler.
3. Turn off the gas valve.
4. Close water supply valve on the inlet to the appliance. If there is no valve, turn off main water valve.
5. Open the hot water faucets completely.
6. Remove the cold water inlet lter and 'CH' return lter.
8. To rell the combination boiler, reassemble the lters back into the combination boiler and reverse
steps 6 back to 1.
MFTCW199
MFTCW140
7. Clean them with a toothbrush and clean running water.