Install Instructions

MINI-THERM JV
Page 3
SECTION 1.
General Information
1A. Introduction
This manual provides information necessary for
the installation, operation, and maintenance of the
Laars Mini-Therm model JV low pressure, copper
tube hydronic boilers. These boilers are available
in two congurations; the JVH has a hot surface
pilot ignition system and the JVS has an electronic
intermittent ignition device (I.I.D.). Look for the
model designation on the rating plate, which can be
found on top of the boiler.
All application and installation procedures should
be reviewed completely before proceeding with
the installation. Consult the Laars factory, or local
factory representative, with any problems or questions
regarding this equipment. Experience has shown that
most operating problems are caused by improper
installation.
WARNING
This hydronic boiler must be installed in
accordance with the procedures detailed in this
manual, or the Laars warranty will be voided. The
installation must conform to the requirements of
the local jurisdiction having authority, and, in the
United States, to the latest edition of the National
Fuel Gas Code, ANSI Z223.1. In Canada, the
installation must conform with the latest edition of
CAN/CGA B149.1 OR .2 installation codes for gas
burning appliances, and/or local codes.
Any modications to the boiler, its gas controls,
gas orices, wiring or draft inducer assembly
may void the warranty. If eld conditions require
modications, consult the factory representative
before initiating such modications.
ATTENTION
L' eau chaude chaudière doit être installé en
conformité avec les procédures détaillées dans
ce manuel, ou le Laars garantie sera annulée.
L'installation doit être conforme aux exigences
de la juridiction locale ayant l'autorité, et, aux
ÉTATS-UNIS , à la dernière édition du National
gaz carburant Code, ANSI Z223.1. Au Canada,
l'installation doit être conforme à la plus récente
édition de la norme CAN/CGA B149.1 ou .2 codes
d'installation gaz pour appareils de combustion et/
ou codes locaux.
1B. Warranty
The Laars Mini-Therm model JV boilers are covered
by a limited warranty. The owner should complete the
warranty registration online by going to www.Laars.
com. and select the 'Support' pull-down to nd the new
product warranty registration form.
All warranty claims must be made to an authorized
Laars representative or directly to the factory. Claims
must include the boiler serial number and model
(this information can be found on the rating plate),
installation date, and name of the installer. Shipping
costs are not included in the warranty coverage.
Some accessory items are shipped in separate
packages. Verify receipt of all packages listed on
the packing slip. Inspect everything for damage
immediately upon delivery, and advise the carrier of
any shortages or damage. Any such claims should be
led with the carrier. The carrier, not the shipper, is
responsible for shortages and damage to the shipment
whether visible or concealed.
The warranty does not cover damage caused by
improper assembly installation, operation or eld
modication.