User's Manual

8.8 Indoor Temperature High Alarm Setting

1) Place your cursor over the Indoor temperature high alarm box and right click the mouse to open the

indoor temperature high alarm window

2) Drag the cursor over the sliding scale to set the desired indoor temperature high or enter the temperature

in the box provided

3) Click the alarm active box to set the indoor temperature high alarm

4) Click the set button to confirm

5) The indoor temperature high alarm is now set and will activate when the set indoor temperature level is

reached (for setting the indoor temperature high alarm from the base station, see main instruction

manual).

Note: The alarm bell icon may not appear immediately on the Heavy Weather program since it may take few

seconds for the program to calculate and confirm the setting

Once the alarm is entered into the Heavy Weather program, the information will be transferred to the

base station. In some situations, the alarm icon may not appear immediately on the base station’s

LCD but will appear after a short delay due the constant data communication between all the

sensors, base station and the PC.

8.9 Indoor Temperature Low Alarm Setting

1) Place your cursor over the Indoor temperature low alarm box and right click the mouse to open the indoor

temperature high alarm window

2) Drag the cursor over the sliding scale to set the desired indoor temperature low or enter the temperature