Other Content

ManualsBrandsLa Crosse Technology ManualsGarden CenterColor LCD Wireless Weather Station with USB Charging Port

The Wireless Color Forecast Station features manual set time, date,

weather forecast, indoor and outdoor temperature/humidity, with

temperature alerts, and heat index and dew point, on a stylish, colorful,

and easy to read display. Use the integrated USB charging port to

charge your smartphone, camera or other device when the forecast

station operates on A/C power. Wireless transmission range of over 200

feet (60 meters) in open air, from transmitter to forecast station.

WIRELESS COLOR FORECAST STATION

THIS STATION LEARNS

Please allow 3-4 weeks for barometer calibration to generate an

accurate forecast.

SETUP INSTRUCTIONS STEP BY STEP

STEP 1:

• Insert the 5-volt A/C power adapter into the designated area on the

back of the forecast station.

• Plug the A/C power adapter into

a wall outlet for continuous

backlight (ON/OFF), and dimmer

feature.

STEP 2: (optional battery

operation)

• Remove battery cover from the

forecast station: Slide tab down

and pull out to remove the cover.

• Insert 3 NEW AAA batteries (not

included) into the back of the forecast station. Observe the correct

polarity (see marking inside the battery compartment).

• The forecast station will light up and show, indoor temperature,

humidity and time.

• (Press and release the HI/LOW/OFF button to illuminate the backlight

for 8 seconds when using only battery power.)

• Do Not Mix Old and New Batteries

• Do Not Mix Alkaline, Standard, Lithium or Rechargeable

Batteries

STEP 3:

• Ensure that the transmitter is within 10 feet of the forecast station.

• Remove battery cover from transmitter: Slide the battery

cover down and lift off the front.

• Insert 2 NEW AA batteries (not included) into the TX141TH-

B transmitter. Observe the correct polarity.

• Within 3 minutes, the forecast station will show readings in

the Outdoor temperature area on the LCD.

Note: Use Alkaline batteries (or Lithium for temperatures

below - 20°F /-28.8°C).

TRANSMITTER SIGNAL STRENGTH

 After the batteries are inserted, the forecast station will search for the

outdoor temperature/humidity transmitter for 3 minutes.

 The antenna symbol will flash during reception, and temperature

display will be dashes “---“.

 The antenna symbol will scroll during transmitter synchronization.

 If synchronization fails once, the antenna will lose one bar.

 If synchronization fails twice, the antenna will lose two bars.

 If reception continuously fails to receive 5 times, the antenna symbol

will be shown as

 The antenna will show full display with successful RF

(radio frequency) reception.

TROUBLESHOOTING

 If the outdoor temperature is not displayed after three

minutes, hold the SENSOR SEARCH button on the

forecast station for three seconds to search for

outdoor transmitter.

 Next, remove the battery cover from the TX141TH-B transmitter then

press the TX button to send a signal.

 If it still does not receive the outdoor temperature, remove the A/C

cord and batteries from both the forecast station and the transmitter

for 15 minutes repeat setup instructions from step 1.

TIME/DATE

The SETTINGS button moves through the program menu

and confirm settings.

Use the UP ARROW button to increase a value.

Use the DOW N ARROW button to decrease a value.

SET TIME/DATE

Hold the SETTINGS button for three seconds to enter time set mode.

 12/24-HOUR: The time format 12H will flash. Use the ARROW

buttons to choose 12-hour or 24-hour time format and press the

SETTINGS button to confirm and move to hour.

 HOUR: The Hour will flash. Use the ARROW buttons to choose the

hour, and press the SETTINGS button to confirm and move to

minutes.

 MINUTES: The Minutes will flash. Use the ARROW buttons to

choose the minutes, and press the SETTINGS button to confirm and

move to the year.

 YEAR: The Year will flash. Use the ARROW buttons to choose the

year, and press the SETTINGS button to confirm and move to the

month.

 MONTH: The Month will flash. Use the ARROW buttons to choose

the month, and press the SETTINGS button to confirm and move to

the date.

 DATE: The Date will flash. Use the ARROW buttons to choose the

date, and press the SETTINGS button to confirm and move to

Fahrenheit/Celsius.

 FAHRENHEIT/CELSIUS: °F or °C will flash. Use the ARROW buttons

to select Fahrenheit or Celsius. Press and release the SETTINGS

button to confirm and exit the program menu.

Note: When no buttons are pressed for ten seconds, the forecast station

will save the last change and default back to normal time and

temperature display mode.

Wireless Color Forecast Station

Model: 308-1412 | Quick Setup Guide

Summary of content (4 pages)

PAGE 1
Wireless Color Forecast Station Model: 308-1412 | Quick Setup Guide The Wireless Color Forecast Station features manual set time, date, weather forecast, indoor and outdoor temperature/humidity, with temperature alerts, and heat index and dew point, on a stylish, colorful, and easy to read display. Use the integrated USB charging port to charge your smartphone, camera or other device when the forecast station operates on A/C power.
PAGE 2
ALARM TIME USB CHARGE PORT The TIME ALARM button moves through the alarm set mode and confirms settings. Use the UP ARROW button to increase a value. Use the DOWN ARROW button to decrease a value. SET ALARM TIME From normal time and temperature display mode, press and release the TIME ALARM button once to show alarm time. Hold the TIME ALARM button for three seconds to enter alarm set mode.  HOUR: The Hour will flash.
PAGE 3
SELECT TEMPERATURE ALERT VALUE FORECAST TENDENCY INDICATOR Hold the TEMP ALERT button for five seconds, until the forecast station beeps, to select and set temperature alert values.  OUTDOOR HI alert will flash. Press the ARROW buttons to set the alert value, and press the TEMP ALERT button to confirm. Then press the TEMP ALERT button again switch to OUTDOOR LOW setting.  OUTDOOR LO alert will flash. Press the ARROW buttons to set the alert value, and press the TEMP ALERT button to confirm.
PAGE 4
POSITION THE OUTDOOR TRANSMITTER Once the forecast station shows the outdoor temperature/humidity, place it and the transmitter in the desired locations and wait approximately 1-hour before permanently mounting the transmitter to ensure that there is proper reception. The transmitter should be mounted vertically, in a shaded, protected area, at least 6 feet from the ground to avoid damage and ensure accurate readings.