Assembly Instructions

ManualsBrandsLa Cornue ManualsAppliancesLa Cornue 65" G4 Chateau 165 Series Range

Assembly instructions INSTALLATION

Page 28

LA CORNUE

Installation Guide Centenaire

08NOTINSTAL100/USA-2

Château cookers are equipped with adjustable legs so the height of the cooktop can vary from

895 mm (35.24 in) to 915 mm (36.02 in).

Remove the drawers and plinthes/toe-kicks, set the cooker in place, screw up the central legs so

the cooker rests on the outside legs and adjust the height.

Once the cooker is resting at the right height and is level, screw down the central legs to balance

the weight.

USA & CANADA

SSEMBL

INSTR

UCTIONS

1. HANDRAIL INSTALLATION

2. RISER / BACKSPLASH INSTALLATION

3. HEIGHT ADJUSTMENT

13 mm

8 mm

Support

Plate

M8x20

Support

Plate

M5x16

Washer

Inserts

Summary of content (5 pages)

PAGE 1
USA & CANADA Assembly instructions A SSEMBLY INSTALLATION INSTR UCTIONS 1. HANDRAIL INSTALLATION Plate M8x20 Support 13 mm M8x20 Support Plate 2. RISER / BACKSPLASH INSTALLATION Washer M5x16 Inserts 8 mm 3. HEIGHT ADJUSTMENT Château cookers are equipped with adjustable legs so the height of the cooktop can vary from 895 mm (35.24 in) to 915 mm (36.02 in).
PAGE 2
Assembly instructions 4. GAS CHIMNEY PROTECTION INSTALLATION Gas chimney protection plate comes separately in the package and needs to be installed above the flue channel behind the gas oven. Gas oven chimney protection 2 x Screw M5 x 16 mm + washer Gas oven chimney protection CONNECTIONS T his appliance must be installed by a qualified La Cornue professional in accordance with the current regulations in the country where the appliance is installed.
PAGE 3
Electrical connection INSTALLATION USA & CANADA Rear view All Cooktops 1 1/2“ (40 mm) Electrical connection Terminal Block Gas Inlet Male 1/2 NPT connection 7 5/8“ (195 mm) 1. ELECTRICAL CONNECTION The appliance must be electrically installed and grounded in accordance with local codes or in the absence of such codes with the latest edition of the "National Electrical Code", ANSI/NFPA 70 in the USA, and CSA C22.2 "Canadian Electrical Code” - in Canada.
PAGE 4
INSTALLATION Electrical connection USA & CANADA 2. Now the terminal block is accessible Terminal block Ranges Cooktops 3. The appliance is shipped with a strain relief device to secure power cord. Insert the power cord through the strain relief and tighten it. 4. Insert the strain relief device into the hole and push it to the left. Tight up the power cord and strain relief device with the screw. 5.
PAGE 5
USA & CANADA Gas connection INSTALLATION 2. GAS CONNECTION The installation of your La Cornue appliance must conform with local codes or, in the absence of local codes, in the USA with the "National Fuel Gas Code", ANSI Z223.1, latest edition, and, in Canada, with CAN/CGA - B149.1, and CAN CGA - B149.2, "Installation Code for Gas Burning Appliances". All La Cornue ranges and cooktops are fully assembled and equipped for use with the type of gas shown on the rating plate of the appliance.