User guide

AT-STRIP-01
AT-STRIP-01
For use with: RG 58, 59, 62, 6, 174, 316, WBC/LMR® 100, 195, 200, 240
Stripping Distance: 4, 6, 8, 10, 12 mm
Copyright © This drawing is property of L-com Global Connectivity. All rights reserved.
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
WWW.L-COM.COM E-MAIL: [e-mail] PHONE: [phone] FAX: [phone]
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.
ADJUST V-BLOCK
6 = RG 6 LMR® 240
8 = RG 58 LMR® 195, 200
9 = RG 59, 62
D = RG 174, 316 LMR® 100
ADJUST BLADE DEPTH
STRIPPING DIRECTION
AT-STRIP-02
AT-STRIP-02
For use with: RG 8, 11, 213, 214, WBC/LMR® 400
Stripping Distance: 4, 6, 8, 10, 12 mm
Replacement Blades: AT-STRIP-B2
Fixed Blades Pin
Shaft Pin
A B C D
Adjust blade height
with provided allen
wrench.
Remove pin to
move blades.
Move blade
positions to adjust
stripping distance.
C + D = 4 mm
B + C = 6 mm
A + C = 8 mm
B + D = 10 mm
A + D = 12 mm
Remove pin to
adjust stripping
distance.
Allen wrench
D = 4, 6, 8, 10, 12 mm
STRIPPING DISTANCE
Replacement Blades: AT-STRIP-B1
STRIPPING DISTANCE BLADE POSITIONS
A B C D E
C + E = 4 mm
B + D = 6 mm (PRESET)
B + E = 8 mm
A + D = 10 mm
A + E = 12 mm