User Guide

Copying Functions
1-75
Output Destination
Specify the optional document finisher or multi-job tray as the output destination as follows.
1
Press [Edit]. On the next screen, press
[Select of Output].
NOTE: The option to select the output
destination is displayed only if the
copier is equipped with the optional
document finisher or multi-job tray.
The output destination setting applies
to all other steps. Simply complete this
setting once as an initial step.
2
Specify the output destination. Refer to
Output Destination on page 1-49 for
details.
3
Press [Close].
Ready to Job build.
Job Build
Off
Border
Auto
Basic
Quality
Page #
Tray A
Off
Edit
1 sided copy-Left
Finished page #:
Step
None
Place originals then press Start key.
Select
Orig.Size
None
Margi n/
Center ing
Select of
Repeat
Erase Copy
Output
Place originals then press Start key.
BackSelec t of Output
Ready to Job build.
Selec t proper output tray to avoid
mixing jobs.
You can confirm output tray with ou
t
management.
Auto
Tray A
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5