Operation Manual

5
3.OPERATION INSTRUCTIONS
(1) IGNITION SWITCH/STEERING&HANDLEBAR LOCK
① ON :At this position,power is connected to
start the engine.The key cannot be taken out.
② OFF :At this position,power is cut off and the
engine stops.The key can be taken out.
③ LOCK:At this position,the steering handlebar is
locked.The key can be taken out.
《Locking Method》
Turn the steering handlebar left to the full and
then push and turn the ignition switch key left
to the “ LOCK ” position,the handlebar can be
locked.
《Unlocking Method》
Turn the ignition switch key right to the “OFF”
and the“LOCK” is released automatically.
CAUTION:
· After locking,turn the handlebar gently to make
sure that it is locked.
·Do not trun the ignition switch to the “LOCK”
Position during riding,otherwise the handlebar
will be out of control and cause accidents.
·Don`t park your motorcycle at a place to hinder the
traffic.