User's Manual

hci dongle is Bluetooth hardware with Universal Serial Bus (USB) port. and the
hardware is embeded with Bluetooth Host Controller Interface.
hci mode
In this mode, the dongle will behave as a standard USB HCI Bluetooth dongle.
As with a standard USB dongle USB VendorID = 0x0458 ProductID = 0x0001
in this mode.
BD_ADDR
BD_ADDR is the unique address of a Bluetooth device. Each Bluetooth
transceiver is allocated a unique 48-bit Bluetooth device address (BD_ADDR).
This address is derived from the IEEE802 standard.
bluetooth device name
The Bluetooth device name is the user-friendly name that a Bluetooth device
presents itself with.
inquire
In the Bluetooth system, an inquiry procedure is defined which is used in
applications where the destination’s device address is unknown to the source.
One can think of public facilities like printers or facsimile machines, or access
points to a LAN. Alternatively, the inquiry procedure can be used to discover
which other Bluetooth units are within range. During an inquiry substate, the
discovering unit collects the Bluetooth device addresses and clocks of all units
that respond to the inquiry message. It can then, if desired, make a connection
to any one of them by means of the previously described page procedure.
Bluetooth PIN code
The Bluetooth PIN is used to authenticate two Bluetooth devices (that have not
previously exchanged link keys) to each other and create a trusted relationship
between them. The PIN is used in the pairing procedure to generate the initial
link key that is used for further authentication. The PIN may be entered on UI
level but may also be stored in the device; e.g.in the case of a device without
sufficient MMI for entering and displaying digits.